Autodesk 24000-000000-9860 - Revit Architecture - PC, User Manual

Page: 943 / 1646

2 Select the building pad.
NOTE Use the TAB key to cycle through the selection options. Selection options are displayed on
the left side of the status bar.
3 On the Options Bar, click Edit.
4 On the Design Bar, click Slope Arrow.
5 Sketch the slope arrow on the building pad.
6 With the slope arrow highlighted, click (Element Properties).
7 For Specify, choose either Height at Tail or Slope.
■ If you select Height at Tail, then select a level and specify a height offset for both the tail
and head of the arrow
■ If you select Slope, then select a level and specify a height offset for the tail, then the input
value for Slope
8 Click OK.
9 Click Finish Sketch.
Building Pad Properties
You can change the properties of building pad types and building pad instances.
Modifying Building Pad Properties
1 Open a site or plan view.
2 Select the building pad.
NOTE Use the TAB key to cycle through the selection options. Selection options are displayed on
the left side of the status bar.
3 Click (Element Properties).
■ To change properties of the building pad instance, change the values in the Element Properties
dialog.
■ To change the properties of the building pad type, click Edit/New in the Element Properties
dialog, and change the properties as desired.
4 Property changes made to a building pad type affect all building pads of this type in the project.
(To create a new building pad type, click Duplicate.)
5 When finished, click OK.
Building Pad Type Properties
Description Name
Construction
Building Pad Properties | 905