manualshive.com logo in svg

Autodesk 24000-000000-9860 - Revit Architecture - PC, User Manual

The "Autodesk 24000-000000-9860 - Revit Architecture - PC" is a powerful design software for architects and designers. With its intuitive interface, this software enables users to create stunning building designs. Enhance your experience with the free and downloadable user manual available at manualshive.com, providing comprehensive instructions and essential tips for optimal usage.

Share
Download
background image

To switch to the mini View Objects wheel

■

Right-click on the wheel and click Mini View Object Wheel.

Tour Building Wheels

The Tour Building wheels are for 3D navigation. Use the Tour Building wheels to navigate within the interior
of a model.

The big Tour Building wheel is divided into the following wedges:

■

Forward

 on page 184. 

Adjusts the distance between the current point of view and the defined pivot point

of the model. Clicking once moves forward as far as the object you clicked.

■

Look

 on page 185. 

Swivels the current view.

■

Rewind

 on page 188. 

Restores the most recent view. You can move backward or forward through previous

views.

■

Up/Down

 on page 189. 

Slides the current view of a model along the 

Y

 axis of the screen.

The mini Tour Building wheel is divided into the following wedges:

■

Walk (Top wedge)

 on page 190. 

Simulates walking through a model.

■

Rewind (Right wedge)

 on page 188. 

Restores the most recent view. You can move backward or forward

through previous views.

■

Up/Down (Bottom wedge)

 on page 189. 

Slides the current view of a model along the 

Y

 axis of the screen.

■

Look (Left wedge)

 on page 185. 

Swivels the current view.

To switch to the big Tour Building wheel

■

Right-click on the wheel and click Basic Wheels 

 ➤ 

 Tour Building Wheel.

To switch to the mini Tour Building wheel

■

Right-click on the wheel and click Mini Tour Building Wheel.

Full Navigation Wheel

The Full Navigation wheel combines the 2D and 3D navigation tools found on the View Object and Tour
Building wheels.

SteeringWheels | 181

Summary of Contents for 24000-000000-9860 - Revit Architecture - PC















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 24000-000000-9860 - Revit Architecture - PC

KIP KUWPD Operation Manual preview
KUWPD
Brand: KIP Pages: 22
M-Audio Afro-Cuban Percussion Quick Start Manual preview
Afro-Cuban Percussion
Brand: M-Audio Pages: 5
Adobe 23101764 - Photoshop CS - PC Manual preview
23101764 - Photoshop CS - PC
Brand: Adobe Pages: 105
Adobe LIVE CYCLE 7.2 - INSTALLING AND CONFIGURING LIVECYCLE FOR JBOSS Manual preview
LIVE CYCLE 7.2 - INSTALLING AND CONFIGURING LIVECYCLE FOR JBOSS
Brand: Adobe Pages: 90
Kenwood ARCP-2000 Instruction Manual preview
ARCP-2000
Brand: Kenwood Pages: 21
Kenwood KDC-X8006U Instruction Manual preview
KDC-X8006U
Brand: Kenwood Pages: 40
Kenwood KDC-MP735U Instruction Manual preview
KDC-MP735U
Brand: Kenwood Pages: 52
Kenwood KDC-X891 Instruction Manual preview
KDC-X891
Brand: Kenwood Pages: 68
Symantec WISE MOBILE DEVICE PACKAGE EDITOR 7.0 SP2 Reference preview
WISE MOBILE DEVICE PACKAGE EDITOR 7.0 SP2
Brand: Symantec Pages: 22
Samsung UN55C7000WF Quick Setup Manual preview
UN55C7000WF
Brand: Samsung Pages: 2
Samsung UN40C7000WFXZA Troubleshooting Manual preview
UN40C7000WFXZA
Brand: Samsung Pages: 4
Samsung UN46ES8000FXZA Fast Track Troubleshooting preview
UN46ES8000FXZA
Brand: Samsung Pages: 5
Samsung UN40C7000WF (Spanish) Software Manual preview
UN40C7000WF
Brand: Samsung Pages: 7
Samsung UE40C7000WW User Manual preview
UE40C7000WW
Brand: Samsung Pages: 7
Samsung SVM-­S1 Quick Reference Manual preview
SVM-­S1
Brand: Samsung Pages: 8
Samsung SyncMaster T23A750 Service Manual preview
SyncMaster T23A750
Brand: Samsung Pages: 46
Samsung UN40ES6820F Service Manual preview
UN40ES6820F
Brand: Samsung Pages: 85
Samsung SyncMaster C27A750X (Spanish) Manual Del Usuario preview
SyncMaster C27A750X
Brand: Samsung Pages: 102

Brands by name

Popular brands

Load more brands