Description
Name
Specifies the estimated reinforcement volume of the selected element. This
is a read-only parameter that only displays when rebar has been placed.
Estimated Reinforcement Volume
Applies to steel beams only. The beam camber.
Camber Size
Applies to steel beams only. The number of studs per beam.
Number of Studs
Dimensions
The length between beam handles. See
Beam Handles
on page 777. This is
the analytical length of the beam. This is a read-only value.
Length
The volume of the selected beam. This is a read-only value.
Volume
Identity Data
User comments.
Comments
A label created for the beam. Possible use: shop mark. This value must be
unique for each element in a project. Revit Architecture warns you if the
Mark
number is already used but allows you to continue using it. You can see the
warning using the Review Warnings command. See
Reviewing Warning
Messages
on page 1334.
Phasing
Indicates in which phase the beam component was created. See
Project
Phasing
on page 1263.
Phase Created
Indicates in which phase the beam component was demolished. See
Project
Phasing
on page 1263.
Phase Demolished
Structural Analysis
Start release conditions. Either Fixed, Pinned, Bending Moment, or User
Defined. User Defined allows you to enable/disable each of the start release
conditions.
Start Release
Translational release at the start end of the beam along the x-axis.
Start Fx
Translational release at the start end of the beam along the y-axis.
Start Fy
Translational release at the start end of the beam along the z-axis.
Start Fz
Rotational release at the start end of the beam along the x-axis.
Start Mx
Rotational release at the start end of the beam along the y-axis.
Start My
806 | Chapter 12 Working with Structural Components
Summary of Contents for 24000-000000-9860 - Revit Architecture - PC
