manualshive.com logo in svg

Autodesk 24000-000000-9860 - Revit Architecture - PC, User Manual

The "Autodesk 24000-000000-9860 - Revit Architecture - PC" is a powerful design software for architects and designers. With its intuitive interface, this software enables users to create stunning building designs. Enhance your experience with the free and downloadable user manual available at manualshive.com, providing comprehensive instructions and essential tips for optimal usage.

Share
Download
background image

■

Select Panels on Face (available for curtain systems created by face only)

■

Select Panels on Host

Selecting Mullions

The shortcut menu options for selecting multiple mullions vary depending on whether you access them
from the curtain host element or a selected mullion.

If you right-click a curtain wall and click Select Mullions, the following options are available:

■

Select Mullions on Vertical Grid. Selects all interior mullions on vertical grids.

■

Select Mullions on Horizontal Grid. Selects all interior mullions on horizontal grids.

■

Select All Mullions. Selects all mullions on the host.

If you right-click a curtain system or sloped glazings and click Select Mullions, the following options are
available:

■

Select Mullions on Grid 1. Selects all interior mullions that lie on the grid 1 layout. For more information
on grid layouts, see 

Type-Driven Curtain Element Layout

 on page 705.

■

Select Mullions on Grid 2. Selects all interior mullions that lie on the grid 2 layout.

■

Select All Mullions. Selects all mullions on the host.

If you right-click an individual mullion and click Select Mullions, the following options are available:

■

Select Mullions on Gridline. Selects all mullions that lie on the same gridline as the selected mullion.

■

Select Mullions Across Gridline. Selects all interior mullions that lie on gridlines opposite the gridline
on which the selected mullion lies.

■

Select Mullions on Vertical Grid. Selects all vertical mullions.

■

Select Mullions on Horizontal Grid. Selects all horizontal mullions.

■

Select Inner Mullions. Selects all interior mullions on the same face as the selected mullion.

■

Select Border Mullions. Selects all border mullions on the same face as the selected mullion.

■

Select Mullions on Host. Selects all mullions on the host.

Restoring a Selection

To restore a selection (of one or more elements) that you have cleared, while pressing 

CTRL

, press the 

LEFT

ARROW

 on the keyboard. Alternatively, you can right-click anywhere in the drawing area, and click Select

Previous on the shortcut menu.

You can only restore a selection while Modify is active. If you switch to a different command, the selection
is cleared.

Removing Elements from a Selection

To deselect an element, while pressing 

SHIFT

, click the element. Other selected elements remain selected.

278 | Chapter 7   Editing Elements

Summary of Contents for 24000-000000-9860 - Revit Architecture - PC















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 24000-000000-9860 - Revit Architecture - PC

McAfee VirusScan Plus User Manual preview
VirusScan Plus
Brand: McAfee Pages: 205
Novell EVOLUTION 2.6 Manual preview
EVOLUTION 2.6
Brand: Novell Pages: 126
ScanSoft OMNIPAGE 15 Manual preview
OMNIPAGE 15
Brand: ScanSoft Pages: 94
IBM Nways 8260 Manual preview
Nways 8260
Brand: IBM Pages: 354
Symantec NORTON INTERNET SECURITY - FOR MAC V4 User Manual preview
NORTON INTERNET SECURITY - FOR MAC V4
Brand: Symantec Pages: 28
Symantec CONFLICTMANAGER Reference preview
CONFLICTMANAGER
Brand: Symantec Pages: 54
MACROMEDIA COLDFUSION 4.5-CFML LANGUAGE Reference preview
COLDFUSION 4.5-CFML LANGUAGE
Brand: MACROMEDIA Pages: 608
TANDBERG Microsoft Exchange Integration V 11.8 Installation And Usage Manual preview
Microsoft Exchange Integration V 11.8
Brand: TANDBERG Pages: 39
Wavefactory TrackSpacer User Manual preview
TrackSpacer
Brand: Wavefactory Pages: 16
Sans Digital Web GUI RAID Management Tools Default Setting preview
Web GUI RAID Management Tools
Brand: Sans Digital Pages: 1
FARONICS WIN SELECT Product Data Sheet preview
WIN SELECT
Brand: FARONICS Pages: 2
HP MSL4048 - StorageWorks Ultrium 920 Tape Library Firmware Release Notes preview
MSL4048 - StorageWorks Ultrium 920 Tape Library
Brand: HP Pages: 4
HP Kayak XA05 Supplementary Manual preview
Kayak XA05
Brand: HP Pages: 104
HP Media Center m1000 - Desktop PC Software Manual preview
Media Center m1000 - Desktop PC
Brand: HP Pages: 162
HP LASERJET ENTERPRISE 500 Reference preview
LASERJET ENTERPRISE 500
Brand: HP Pages: 178
HP L.11.09 Release Note preview
L.11.09
Brand: HP Pages: 124
HP MAILbus 400 Installation Instructions Manual preview
MAILbus 400
Brand: HP Pages: 6
HP KAYAK XM600 Technical Reference Manual preview
KAYAK XM600
Brand: HP Pages: 138

Brands by name

Popular brands

Load more brands