manualshive.com logo in svg

Autodesk 24000-000000-9860 - Revit Architecture - PC, User Manual

The "Autodesk 24000-000000-9860 - Revit Architecture - PC" is a powerful design software for architects and designers. With its intuitive interface, this software enables users to create stunning building designs. Enhance your experience with the free and downloadable user manual available at manualshive.com, providing comprehensive instructions and essential tips for optimal usage.

Share
Download
background image

dimensions are to the nearest component, so the dimensions you see may be different from the original
temporary dimensions. If there are dimensions you want to appear at all times, create permanent dimensions.

You can modify temporary dimensions to reference the components you want by moving the witness lines.
You can also specify the display and placement of temporary dimensions. See 

Specifying Temporary Dimension

Settings

 on page 497.

Showing Temporary Dimensions When Multiple Elements are Selected

When you select multiple elements in Revit Architecture, temporary dimensions and constraints do not
display.

System performance can significantly increase when the temporary dimensions and constraints are not
displayed.

To show temporary dimensions and constraints:

1

Select multiple elements in the drawing area.

2

On the Options Bar, click Activate Dimensions.

NOTE

System performance can significantly increase when the temporary dimensions and constraints

are not displayed.

Changing Temporary Dimensions to Permanent Dimensions

1

Select a component in the drawing area.

2

Click the dimension symbol 

 that appears near the temporary dimension. You can then

modify the properties of the new dimension and change its type.

Permanent Dimensions

A permanent dimension is a dimension that you specifically place. Permanent dimensions can appear in 2
different states: modifiable and non-modifiable. You can modify a permanent dimension when the geometry
that it references is selected.

If the geometry that a permanent dimension references is not selected for modification, the dimension
appears at its true size and is not available for modification. This is done to eliminate crowding of dimensions
when they are not needed for modification.

Permanent dimension in a non-modifiable state

When dimensioning components such as doors and windows, you can select either the edge of the opening
to dimension or you can select the center of the component to dimension.

214 | Chapter 5   Using Dimensions and Constraints

Summary of Contents for 24000-000000-9860 - Revit Architecture - PC















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 24000-000000-9860 - Revit Architecture - PC

MACROMEDIA CONTRIBUTE-USING CONTRIBUTE Use Manual preview
CONTRIBUTE-USING CONTRIBUTE
Brand: MACROMEDIA Pages: 214
NETGEAR GS700AT Series Installation Manual preview
GS700AT Series
Brand: NETGEAR Pages: 2
Extreme Networks EPICenter 4.1 Software Installation Manual preview
EPICenter 4.1
Brand: Extreme Networks Pages: 546
Extreme Networks ExtremeWare 7.5 Command Reference Manual preview
ExtremeWare 7.5
Brand: Extreme Networks Pages: 2546
Novell DATA SYNCHRONIZER - UPDATE 1 Installation Manual preview
DATA SYNCHRONIZER - UPDATE 1
Brand: Novell Pages: 9
Mitsubishi Gpredict 1.2 User Manual preview
Gpredict 1.2
Brand: Mitsubishi Pages: 64
Minolta DIMAGE VIEWER 2.1 Instruction Manual preview
DIMAGE VIEWER 2.1
Brand: Minolta Pages: 84
Samsung LN32D467E1H Software Manual preview
LN32D467E1H
Brand: Samsung Pages: 1
Samsung MZ-7PC064D Specifications preview
MZ-7PC064D
Brand: Samsung Pages: 2
Samsung S1A0905-S0B0 Quick Start Manual preview
S1A0905-S0B0
Brand: Samsung Pages: 6
Samsung MZ-7PC064D User Manual preview
MZ-7PC064D
Brand: Samsung Pages: 59
Palm Phone Link Handbook preview
Phone Link
Brand: Palm Pages: 22
Texas Instruments TI InterActive! Getting Started Manual preview
TI InterActive!
Brand: Texas Instruments Pages: 63
AMX BCS Instruction Manual preview
BCS
Brand: AMX Pages: 53
GRASS VALLEY AURORA BROWSE 7 Datasheet preview
AURORA BROWSE 7
Brand: GRASS VALLEY Pages: 4
Autodesk 18506-091462-9305 - Architectural Desktop 2006 Update Manual preview
18506-091462-9305 - Architectural Desktop 2006
Brand: Autodesk Pages: 290
KAPERSKY ANTI-VIRUS 5.5 - FOR MICROSOFT EXCHANGE SERVER 2000-2003 Administrator'S Manual preview
ANTI-VIRUS 5.5 - FOR MICROSOFT EXCHANGE SERVER 2000-2003
Brand: KAPERSKY Pages: 143
Baby Lock Ellisimo Gold II Instruction And Reference Manual preview
Ellisimo Gold II
Brand: Baby Lock Pages: 50

Brands by name

Popular brands

Load more brands