manualshive.com logo in svg

Autodesk 24000-000000-9860 - Revit Architecture - PC, User Manual

The "Autodesk 24000-000000-9860 - Revit Architecture - PC" is a powerful design software for architects and designers. With its intuitive interface, this software enables users to create stunning building designs. Enhance your experience with the free and downloadable user manual available at manualshive.com, providing comprehensive instructions and essential tips for optimal usage.

Share
Download
background image

3

Click to insert the ceiling.

4

On the Design Bar, click Ceiling Properties.

5

In the Element Properties dialog, designate the type of ceiling and its properties.

6

On the Design Bar, click Finish Sketch.

NOTE

You cannot use the Automatic Ceiling command if you have already sketched lines for the

ceiling.

Sloped Ceilings

Revit Architecture provides 3 methods for creating a sloped ceiling while in ceiling sketch mode.

Method 1

While in sketch mode, click Slope Arrow to define the slope of the ceiling. The length of the slope arrow
determines the run, and the height of it determines the rise (hence rise/run). Also, the direction of the line
determines the orientation of the ceiling.

Ceiling sketch with slope arrow

Slope by Setting Height at Tail

1

In the Element Properties dialog, for Specify, select Height at Tail.

2

For Height Offset at Tail, specify how high above the level the slope arrow begins.

3

For Level at Tail, specify the level at which to start the slope arrow. For example, the ceiling
sketch is on Level 2. You could choose to start the slope arrow on Level 3.

4

For Height Offset at Head, specify how high above the level the slope arrow ends.

5

For Level at Head, specify the level at which to end the slope arrow. For example, the ceiling
sketch is on Level 2. You could choose to end the slope arrow on Level 3.

6

Click OK.

Slope by Setting Slope Value

1

In the Element Properties dialog, for Specify, select Slope.

2

For Rise/(Run), specify a slope value.

3

For Height Offset at Tail, specify how high above the level the slope arrow begins.

4

For Level at Tail, specify the level at which to start the slope arrow. For example, the ceiling
sketch is on Level 2. You could choose to start the slope arrow on Level 3.

5

Click OK.

For more information on the Slope Arrow, including its properties, see 

Roof Slope Arrow

 on

page 616.

Sloped Ceilings | 653

Summary of Contents for 24000-000000-9860 - Revit Architecture - PC















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 24000-000000-9860 - Revit Architecture - PC

Novell GROUPWISE 7 - WEB ACCESS Manual preview
GROUPWISE 7 - WEB ACCESS
Brand: Novell Pages: 110
FARONICS DEEP FREEZER PROFESSIONAL Manual preview
DEEP FREEZER PROFESSIONAL
Brand: FARONICS Pages: 31
Alpha Moisture Systems SADPmini Logger Instruction Manual preview
SADPmini Logger
Brand: Alpha Moisture Systems Pages: 14
FARONICS POWER SAVE Manual preview
POWER SAVE
Brand: FARONICS Pages: 80
M-Audio Wayoutware TimewARP 2600 User Manual preview
Wayoutware TimewARP 2600
Brand: M-Audio Pages: 49
M-Audio GForce M-Tron Pro Quick Start Manual preview
GForce M-Tron Pro
Brand: M-Audio Pages: 4
M-Audio DRUM AND BASS RIG (German) Kurzanleitung preview
DRUM AND BASS RIG
Brand: M-Audio Pages: 3
DeLorme Street Atlas USA 2011 User Manual preview
Street Atlas USA 2011
Brand: DeLorme Pages: 265
Garmin Pilot for Android User Manual preview
Pilot for Android
Brand: Garmin Pages: 150
Ulead BD DISCRECORDER Manual preview
BD DISCRECORDER
Brand: Ulead Pages: 18
Red Hat DEVICE-MAPPER MULTIPATH 4.6 Configuration And Administration Manual preview
DEVICE-MAPPER MULTIPATH 4.6
Brand: Red Hat Pages: 42
Red Hat Cluster Suite Manual preview
Cluster Suite
Brand: Red Hat Pages: 188
Avision FS-5900C User Manual preview
FS-5900C
Brand: Avision Pages: 47
Autodesk 24108-051462-9000 - AUTOCAD REVIT ARCH STE 08 COMM NEW SLM DVD Questions And Answers preview
24108-051462-9000 - AUTOCAD REVIT ARCH STE 08 COMM NEW SLM DVD
Brand: Autodesk Pages: 11
Autodesk 057A1-05A111-10MD - AutoCAD LT 2009 Manual preview
057A1-05A111-10MD - AutoCAD LT 2009
Brand: Autodesk Pages: 31
Autodesk 12909-091452-9750 - Map 3D 2006 Student Edition Installation Manual preview
12909-091452-9750 - Map 3D 2006 Student Edition
Brand: Autodesk Pages: 35
Autodesk 057A1-05A111-10MB - AutoCAD LT 2009 Installation Manual preview
057A1-05A111-10MB - AutoCAD LT 2009
Brand: Autodesk Pages: 58
Ubiquiti airVision User Manual preview
airVision
Brand: Ubiquiti Pages: 38

Brands by name

Popular brands

Load more brands