Autodesk 24000-000000-9860 - Revit Architecture - PC, User Manual

Page: 361 / 1646

in the drawing area display in gray, indicating that you cannot modify them during Edit Pasted
mode.
While in Edit Pasted mode, you can deselect and select specific elements. (Deselected elements
display in black; selected elements display in red [or the defined selection color].) This function
allows you to move a specific element without moving all pasted elements. After moving a
pasted element, you can deselect it, and then select another element to move it to the desired
location.
3 The Edit Pasted tab displays tools in the Design Bar. Use these tools as follows:
■ Modify allows you to move or modify selected elements.
■ Finalize Selected finalizes the placement of the currently selected elements. The elements
display in gray, indicating that you can no longer modify them during Edit Pasted mode.
You can continue to move or modify any pasted elements that display in black.
■ Select All selects all pasted elements, so that you can move or modify them.
4 Use functions of the Options Bar as needed to rehost building components, activate listening
dimensions to refine placement, or perform other functions.
5 To complete the paste process, click Finish Paste on the Edit Paste tab of the Design Bar.
If you want to quit Edit Paste mode, discarding the pasted elements, click Quit Paste on the Edit
Pasted tab.
The pasted elements display in black. In addition, the other elements in the drawing area, which appeared
gray during Edit Paste mode, display in black.
Pasting Aligned Elements
1 Cut or copy elements to the clipboard.
See Moving Elements with Cut-and-Paste on page 304 or Copying Elements to the Clipboard on
page 320.
Pasting Elements | 323