Autodesk 24000-000000-9860 - Revit Architecture - PC, User Manual

Page: 512 / 1646

Description Property
The method used to apply the paint to the surface. This value applies a bump map
to the paint to define its texture. It affects the render appearance of the surface only Application
for close-up views. The default value varies. Select the desired value: Roller, Brush, or
Spray.
Plastic/Vinyl Properties
You can define the following properties for plastic or vinyl materials on the Render Appearance tab of the
Materials dialog.
Description Property
Type of material: plastic (solid), plastic (transparent), or vinyl. Type
Color of the material. See Specifying a Render Appearance Color on page 476. Color
Texture of the finished surface. Finish
Bump pattern to use on the finished surface. To define bumps using an image, select
Custom. See
Specifying an Image File for a Render Appearance on page 476.
Finish Bumps
Additional bump pattern, superimposed on the Finish Bumps pattern. To define bumps
using an image, select Custom. See
Specifying an Image File for a Render Appearance
on page 476.
Bump Pattern
Stone Properties
You can define the following properties for stone materials on the Render Appearance tab of the Materials
dialog.
Description Property
Image to use to represent the stone’s surface. See Specifying an Image File for a Render
Appearance on page 476.
Image File
Texture of the finished surface. Finish
Bump pattern to use on the finished surface. To define bumps using an image, select
Custom. See
Specifying an Image File for a Render Appearance on page 476.
Finish Bumps
Additional bump pattern, superimposed on the Finish Bumps pattern. To define bumps
using an image, select Custom. See
Specifying an Image File for a Render Appearance
on page 476.
Bump Pattern
474 | Chapter 9 Customizing Project Settings