manualshive.com logo in svg

Autodesk 24000-000000-9860 - Revit Architecture - PC, User Manual

The "Autodesk 24000-000000-9860 - Revit Architecture - PC" is a powerful design software for architects and designers. With its intuitive interface, this software enables users to create stunning building designs. Enhance your experience with the free and downloadable user manual available at manualshive.com, providing comprehensive instructions and essential tips for optimal usage.

Share
Download
background image

7

When you have reached the last reference point, move the cursor away from the last element,
and click.

The dimension displays.

Angular Dimensions

Angular dimensions can be placed on multiple reference points sharing a common intersection. You cannot
drag the dimension arc to display a full circle.

1

Click Drafting menu

 ➤ 

Dimension, or on the Drafting tab of the Design Bar, click Dimension.

2

On the Options Bar, click 

 (Create Angular Dimensions).

3

Place the cursor on a component and click to create a start point for the dimension.

TIP

You can switch the reference point for the dimension between a wall face and a wall centerline

by pressing TAB.

4

Place the cursor on a component not parallel to the first and click.

TIP

You can select multiple reference points for the dimension. Each element you are dimensioning

must pass through a common point. For example, to create a multiple-reference angular dimension
among 4 walls, each of the 4 walls must pass through a common point.

5

Drag the cursor to size the angular dimension. Choose the sector where you want the dimension
to appear:

Wall join with 4 distinct sectors

6

When sized properly, click to place.

Radial Dimensions

1

Click Drafting menu

 ➤ 

Dimension, or on the Drafting tab of the Design Bar, click Dimension.

2

On the Options Bar, click 

 (Create Radial Dimensions).

3

Place the cursor on the arc and click.

A temporary dimension appears.

TIP

You can switch the reference point for the dimension between a wall face and a wall centerline

by pressing TAB.

218 | Chapter 5   Using Dimensions and Constraints

Summary of Contents for 24000-000000-9860 - Revit Architecture - PC















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 24000-000000-9860 - Revit Architecture - PC

Samsung HMX-U10RN Software Administration Manual preview
HMX-U10RN
Brand: Samsung Pages: 11
Yamaha Add-On Effects Owner'S Manual preview
Add-On Effects
Brand: Yamaha Pages: 5
Acuma Labs De-Esser User Manual preview
De-Esser
Brand: Acuma Labs Pages: 20
TANDBERG Movi 3.0 User Manual preview
Movi 3.0
Brand: TANDBERG Pages: 10
Nortel CC MIS User Manual preview
CC MIS
Brand: Nortel Pages: 374
ARTEX 570-2225 Manual preview
570-2225
Brand: ARTEX Pages: 33
Billion BiGuard C01 Quick Installation Manual preview
BiGuard C01
Brand: Billion Pages: 18
Genius HyperMedia Center Manual preview
HyperMedia Center
Brand: Genius Pages: 12
AVG LINKSCANNER User Manual preview
LINKSCANNER
Brand: AVG Pages: 47
10ZiG Technology Limited RBT Series Configuration Manual preview
RBT Series
Brand: 10ZiG Technology Limited Pages: 125
Autodesk AutoCAD Design Suite 2013 Installation Manual preview
AutoCAD Design Suite 2013
Brand: Autodesk Pages: 138
FieldServer FS-8700-40 Driver Manual preview
FS-8700-40
Brand: FieldServer Pages: 34
MACROMEDIA COLDFUSION MX 61 - CONFIGURING AND ADMINISTERING COLDFUSION... Manual preview
COLDFUSION MX 61 - CONFIGURING AND ADMINISTERING COLDFUSION...
Brand: MACROMEDIA Pages: 168
MACROMEDIA DIRECTOR MX 2004-GETTING STARTED WITH... Getting Started preview
DIRECTOR MX 2004-GETTING STARTED WITH...
Brand: MACROMEDIA Pages: 68
Novell PLATESPIN ORCHESTRATE 2.0.2 - HIGH AVAILABILITY CONFIGURATION GUIDE 06-17-2009 Configuration Manual preview
PLATESPIN ORCHESTRATE 2.0.2 - HIGH AVAILABILITY CONFIGURATION GUIDE 06-17-2009
Brand: Novell Pages: 36
Novell LINUX ENTERPRISE SERVER STARTER SYSTEM Installation Manual preview
LINUX ENTERPRISE SERVER STARTER SYSTEM
Brand: Novell Pages: 54
Novell LINUX ENTERPRISE SERVER 11 - VIRTUALIZATION Manual preview
LINUX ENTERPRISE SERVER 11 - VIRTUALIZATION
Brand: Novell Pages: 132
Rane SIXTY-EIGHT Quick Start Manual preview
SIXTY-EIGHT
Brand: Rane Pages: 8

Brands by name

Popular brands

Load more brands