manualshive.com logo in svg

Autodesk 24000-000000-9860 - Revit Architecture - PC, User Manual

The "Autodesk 24000-000000-9860 - Revit Architecture - PC" is a powerful design software for architects and designers. With its intuitive interface, this software enables users to create stunning building designs. Enhance your experience with the free and downloadable user manual available at manualshive.com, providing comprehensive instructions and essential tips for optimal usage.

Share
Download
background image

Creating a Project Browser Sort Group

1

Click Settings menu

 ➤ 

Browser Organization.

2

In the Browser Organization dialog, click the Views tab to create a sort group for project views,
or click the Sheets tab to create a sort group for sheets.

3

Click New.

4

Enter a name for the sort group, and click OK.

5

In the Browser Organization Properties dialog, click the Folders tab.

6

For the first Group By list, select the view or sheet property to group by.

NOTE

Values for the selected property must be defined for each view or sheet in order for the sort

to work correctly. To edit view or sheet properties, in the Project Browser, right-click the view or sheet
name, and select Properties.

7

If you only want the first few characters of the property value to be considered, select Leading
characters, and specify a value.

8

Optionally, select 2 additional groupings.

9

In the Sort By list, select the order for views or sheets to display in the lowest level grouping,
and select ascending or descending order.

10

Click OK.

Editing a Project Browser Sort Group

1

Click Settings menu

 ➤ 

Browser Organization.

2

In the Browser Organization dialog, click the Views tab to edit a sort group for project views, or
click the Sheets tab to edit a sort group for sheets.

3

Select a sort group.

4

To rename the sort group, click Rename.

5

To edit the sort group properties, click Edit. In the Browser Organization Properties dialog, make
the necessary changes.

6

Click OK.

Adding a Filter to a Project Browser Sort Group

1

Click Settings menu

 ➤ 

Browser Organization.

2

In the Browser Organization dialog, click the Views tab to apply a filter to project views, or click
the Sheets tab to apply a filter to sheets.

3

Select a sort group, and click Edit.

4

In the Browser Organization Properties dialog, click the Filters tab.

5

Select the following:

a

The view or sheet property as the filter.

b

The filter operator.

c

The filter operator value.

For example, to show only those project views associated with Level 1, you can create a filter
by Associated Level, Equal to, Level 1.

Customizing Project View Organization in the Project Browser | 207

Summary of Contents for 24000-000000-9860 - Revit Architecture - PC















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 24000-000000-9860 - Revit Architecture - PC

Juniper SECURITY THREAT RESPONSE MANAGER - LOG MANAGEMENT INSTALLATION REV 1 Installation Manual preview
SECURITY THREAT RESPONSE MANAGER - LOG MANAGEMENT INSTALLATION REV 1
Brand: Juniper Pages: 30
Aruba Networks ClearPass Guest 3.9 Deployment Manual preview
ClearPass Guest 3.9
Brand: Aruba Networks Pages: 518
NeatWorks NeatWorks For Mac Using Manual preview
NeatWorks For Mac
Brand: NeatWorks Pages: 33
AMX APWeb Instruction Manual preview
APWeb
Brand: AMX Pages: 34
Cyber Sciences CyTime EM-100 Quick Start Manual preview
CyTime EM-100
Brand: Cyber Sciences Pages: 2
GRASS VALLEY AURORA BROWSE 7 Datasheet preview
AURORA BROWSE 7
Brand: GRASS VALLEY Pages: 4
Red Hat NETWORK - USER 1.2 User Reference Manual preview
NETWORK - USER 1.2
Brand: Red Hat Pages: 64
Janome AcuFil Tips And Tricks Manual preview
AcuFil
Brand: Janome Pages: 6
Ulead MEDIASTUDIO PRO 6.0 User Manual preview
MEDIASTUDIO PRO 6.0
Brand: Ulead Pages: 360
IBM AH0QXML - Lotus Domino Messaging User Manual preview
AH0QXML - Lotus Domino Messaging
Brand: IBM Pages: 120
KAPERSKY ANTI-VIRUS 5.7 - FOR LINUX FILE SERVER Administrator'S Manual preview
ANTI-VIRUS 5.7 - FOR LINUX FILE SERVER
Brand: KAPERSKY Pages: 104
KAPERSKY ANTI-VIRUS 6.0 User Manual preview
ANTI-VIRUS 6.0
Brand: KAPERSKY Pages: 298
FARONICS CORE Manual preview
CORE
Brand: FARONICS Pages: 99
FARONICS DEEP FREEZE STANDARD - 1-2010 Manual preview
DEEP FREEZE STANDARD - 1-2010
Brand: FARONICS Pages: 24
Datavideo CG-100 User Manual preview
CG-100
Brand: Datavideo Pages: 141
Lucent Technologies INTUITY Messaging Solutions Manual preview
INTUITY Messaging Solutions
Brand: Lucent Technologies Pages: 80
Canon REALiS SX80 Mark II D User Manual preview
REALiS SX80 Mark II D
Brand: Canon Pages: 25
MACROMEDIA COLDFUSION 5 - INSTALING AND CONFIGURING SERVER Manual preview
COLDFUSION 5 - INSTALING AND CONFIGURING SERVER
Brand: MACROMEDIA Pages: 160

Brands by name

Popular brands

Load more brands