manualshive.com logo in svg

Autodesk 24000-000000-9860 - Revit Architecture - PC, User Manual

The "Autodesk 24000-000000-9860 - Revit Architecture - PC" is a powerful design software for architects and designers. With its intuitive interface, this software enables users to create stunning building designs. Enhance your experience with the free and downloadable user manual available at manualshive.com, providing comprehensive instructions and essential tips for optimal usage.

Share
Download
background image

Description

Name

wall continuous, or it can make mullions on Grid 1 or Grid 2 continuous on a
curtain system or sloped glazing.

Vertical/Horizontal Grid Pattern

Sets an automatic vertical/horizontal layout for curtain grid lines along the
length of a curtain wall. When set to a value other than None, Revit Architecture

Layout

automatically adds vertical/horizontal grid lines to a curtain wall. 

Fixed Distance

indicates that the curtain grids are placed at the exact value specified for Ver-
tical/Horizontal Spacing. If the spacing is not an even factor of the wall's length,
Revit Architecture inserts space at one or both ends of the wall, depending on
the justification parameter. For example, if the wall is 46 feet and the vertical
spacing is 5 feet and the justification is set to beginning, Revit Architecture
adds 1 foot from the beginning of the wall before placing the first grid. See
the Vertical/Horizontal Justification instance property description for more in-
formation on justification. 

Fixed Number

 indicates that you can set different

numbers of curtain grids for different curtain wall instances. See the Vertical/Ho-
rizontal Number instance property description for more information. 

Maximum

Spacing

 indicates that the curtain grids are placed at even intervals along the

length of the curtain wall at a distance up to the value specified for Vertical/Ho-
rizontal Spacing.

Enabled when Layout is set to Fixed Distance or Maximum Spacing. When the
layout is set to a fixed distance, Revit Architecture uses the exact value for

Spacing

Spacing. When the layout is at a maximum spacing, Revit Architecture uses up
to the specified value to lay out the grids.

Adjusts the position of type-driven gridlines to ensure that curtain panels are
of equal size, whenever possible. Sometimes when mullions are placed, partic-

Adjust for Mullion Size

ularly on borders of curtain hosts, it can result in panels of unequal size, even
if the Layout is set to Fixed Distance.

Vertical Mullions

Specifies the mullion family for interior vertical mullions.

Interior Type

Specifies the mullion family for vertical mullions on the left border.

Border 1 Type

Specifies the mullion family for vertical mullions on the right border.

Border 2 Type

Horizontal Mullions

Specifies the mullion family for interior horizontal mullions.

Interior Type

Specifies the mullion family for horizontal mullions on the left border.

Border 1 Type

Specifies the mullion family for horizontal mullions on the right border.

Border 2 Type

Identity Data

Curtain Element Properties | 721

Summary of Contents for 24000-000000-9860 - Revit Architecture - PC















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 24000-000000-9860 - Revit Architecture - PC

Canon Optura Pi Install Manual preview
Optura Pi
Brand: Canon Pages: 2
Yamaha MOTIF RACK ES Supplementary Manual preview
MOTIF RACK ES
Brand: Yamaha Pages: 37
Garmin Pilot User's Android User Manual preview
Pilot User's Android
Brand: Garmin Pages: 150
TC Electronic RESTORATION SUITE User Manual preview
RESTORATION SUITE
Brand: TC Electronic Pages: 31
BrainMaster BMrMMP User Manual preview
BMrMMP
Brand: BrainMaster Pages: 14
Adobe PHOTOSHOP CS 2.0 - SCRIPTING GUIDE Manual preview
PHOTOSHOP CS 2.0 - SCRIPTING GUIDE
Brand: Adobe Pages: 91
GE Secure Perfect 6.1.1 User Manual preview
Secure Perfect 6.1.1
Brand: GE Pages: 269
Cabletron Systems 802.1Q VLAN User Manual preview
802.1Q VLAN
Brand: Cabletron Systems Pages: 92
Navman Smart V3 User Manual preview
Smart V3
Brand: Navman Pages: 53
GRASS VALLEY MEDIAEDGE-SVS4 Datasheet preview
MEDIAEDGE-SVS4
Brand: GRASS VALLEY Pages: 2
GRASS VALLEY EDIUS 6 Application Note preview
EDIUS 6
Brand: GRASS VALLEY Pages: 24
GRASS VALLEY AURORA INGEST - S AND UPGRADE INSTRUCTIONS V7.1 Upgrade Instructions preview
AURORA INGEST - S AND UPGRADE INSTRUCTIONS V7.1
Brand: GRASS VALLEY Pages: 66
FieldServer FS-8700-124 Driver Manual preview
FS-8700-124
Brand: FieldServer Pages: 17
Gateway 450RGH Datasheet preview
450RGH
Brand: Gateway Pages: 15
Focusrite LiquidControl Manual preview
LiquidControl
Brand: Focusrite Pages: 22
TC Electronic MegaReverb Manual preview
MegaReverb
Brand: TC Electronic Pages: 7
Colorbyte Software 2000/XP Quick Start Manual preview
2000/XP
Brand: Colorbyte Software Pages: 11
Samsung Universal Print Driver 2 User Manual preview
Universal Print Driver 2
Brand: Samsung Pages: 15

Brands by name

Popular brands

Load more brands