manualshive.com logo in svg

Autodesk 24000-000000-9860 - Revit Architecture - PC, User Manual

The "Autodesk 24000-000000-9860 - Revit Architecture - PC" is a powerful design software for architects and designers. With its intuitive interface, this software enables users to create stunning building designs. Enhance your experience with the free and downloadable user manual available at manualshive.com, providing comprehensive instructions and essential tips for optimal usage.

Share
Download
background image

The local backup file provides protection in case the network save fails. Revit Architecture saves up to 3 local
backup files. It purges older backup files.

The local backup file uses the same name as the project file, with a GMT (Greenwich Mean Time) date and
time stamp appended to it. For example, when you save project.rvt, Revit Architecture saves a local copy to
the Journal folder, using the file name format project_YYYYMMDD-hhmmss-mmm.rvt.

Journal Files

Journal files capture the actions taken by the software during a session of Revit Architecture, from the time
the software starts to the time it stops. These text files can be used to troubleshoot technical problems with
the software.

Revit Architecture creates a new journal file each time you use the software. The journal file with the highest
number is the most recent file. By default, journal files reside in the following location:

C:\Program Files\<Revit product name and version>\Journals

If you encounter problems during a Revit session, your support provider may ask you to send the journal
file and any backup files to help with the troubleshooting process. If you do not encounter problems during
a Revit session, the journal file is of little use and can be deleted. To automate the deletion of old journal
files, see 

General Options

 on page 505.

Closing Revit Files

1

Click File menu

 ➤ 

Close.

2

If you have not saved changes, Revit Architecture prompts you to save the changes. Do one of
the following:

■

To save the changes and close the project, click Yes.

■

To close the project without saving the changes, click No.

■

To cancel the Close request, returning to the open project in Revit Architecture, click Cancel.

3

If you are closing a workshared file and you have not saved changes to the central file, the
Suggest Save to Central dialog opens. See 

Closing a Workshared File Without Saving to Central

on page 1205.

Refreshing the Screen

The Refresh command repaints the screen to remove any extraneous images. You do not normally need to
use this command, but it assures a clean image.

To refresh the screen, do one of the following

■

Press 

F5

.

■

Click View menu

 ➤ 

Refresh.

72 | Chapter 3   Revit Essentials

Summary of Contents for 24000-000000-9860 - Revit Architecture - PC















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 24000-000000-9860 - Revit Architecture - PC

QMS VMS Software Manual preview
VMS
Brand: QMS Pages: 118
3Com NBX 100 Software Upgrade Instructions preview
NBX 100
Brand: 3Com Pages: 4
Navitar 12X Zoom Instruction Manual preview
12X Zoom
Brand: Navitar Pages: 23
Alcatel-Lucent Wireless Network Guardian 9900 Brochure preview
Wireless Network Guardian 9900
Brand: Alcatel-Lucent Pages: 2
AMX Content Database Editor v 1.0 Manual preview
Content Database Editor v 1.0
Brand: AMX Pages: 28
Extreme Networks ExtremeWare 7.0.0 Command Reference Manual preview
ExtremeWare 7.0.0
Brand: Extreme Networks Pages: 1598
Pioneer CNSD-239FM Upgrade Instructions And Operation Manual Addendum preview
CNSD-239FM
Brand: Pioneer Pages: 28
Pioneer CNSD-230FM Upgrade Instructions And Operation Manual Addendum preview
CNSD-230FM
Brand: Pioneer Pages: 28
Red Hat CLUSTER SUITE FOR ENTERPRISE LINUX 4.7 Overview preview
CLUSTER SUITE FOR ENTERPRISE LINUX 4.7
Brand: Red Hat Pages: 78
Red Hat CERTIFICATE SYSTEM 7.2 - MIGRATION GUIDE Administration Manual preview
CERTIFICATE SYSTEM 7.2 - MIGRATION GUIDE
Brand: Red Hat Pages: 512
Tascam GigaEditor 4 User Manual preview
GigaEditor 4
Brand: Tascam Pages: 210
VBrick Systems Portal Server ETV v4.1 Admin Manual preview
Portal Server ETV v4.1
Brand: VBrick Systems Pages: 140
Solid State Logic Soundscape Mixer Reference Manual preview
Soundscape Mixer
Brand: Solid State Logic Pages: 109
Mad Catz SharkPort PS2 Owner'S Manual preview
SharkPort PS2
Brand: Mad Catz Pages: 16
CAERE WORDSCAN User Manual preview
WORDSCAN
Brand: CAERE Pages: 108
MACROMEDIA DREAMWEAVER 8-DREAMWEAVER API Reference preview
DREAMWEAVER 8-DREAMWEAVER API
Brand: MACROMEDIA Pages: 628
VMware VCLOUD REQUEST MANAGER Datasheet preview
VCLOUD REQUEST MANAGER
Brand: VMware Pages: 2
ZENEC Z-EMAP50 User Manual preview
Z-EMAP50
Brand: ZENEC Pages: 80

Brands by name

Popular brands

Load more brands