manualshive.com logo in svg

Autodesk 24000-000000-9860 - Revit Architecture - PC, User Manual

The "Autodesk 24000-000000-9860 - Revit Architecture - PC" is a powerful design software for architects and designers. With its intuitive interface, this software enables users to create stunning building designs. Enhance your experience with the free and downloadable user manual available at manualshive.com, providing comprehensive instructions and essential tips for optimal usage.

Share
Download
background image

When you select a room in a section view, you can visually check its upper and lower boundaries and use
the grips to adjust them, if needed. See 

Rooms in Section Views

 on page 916 and 

Changing the Room Height

Graphically

 on page 931.

Controlling the Visibility of Rooms

By default, rooms do not display in plan views and section views. However, you can change visibility/graphic
settings to make rooms and their reference lines visible in these views. These settings become part of the
view properties.

BEST PRACTICE

Create view templates with the desired room visibility settings. Apply these view templates to

views in which you want to display and work with rooms. See 

View Templates

 on page 498.

To display rooms

1

Open the plan view or the section view.

2

Type 

vg

, or click View menu

 ➤ 

Visibility/Graphics.

3

On the Model Categories tab of the Visibility/Graphic Overrides dialog, scroll down to Rooms,
and click to expand it.

4

To display rooms in the view using an interior fill color, select Interior Fill.

5

To display reference lines for rooms, select Reference.

6

Click OK.

Room Boundaries

Revit Architecture uses room boundaries when computing the area, perimeter, and volume of a room. You
can check room boundaries in plan views and section views.

To check room boundaries, you can select rooms or change visibility/graphic settings for the view. See

Selecting a Room

 on page 914 and 

Controlling the Visibility of Rooms

 on page 915.

TIP

When working with rooms, open a plan view and a section view, and type 

wt

 to tile the windows. This strategy

allows you to see the perimeter of the room and its upper and lower boundaries at the same time.

Related topics

■

Room Area

 on page 926

■

Room Volume

 on page 928

■

Design Options and Rooms

 on page 1256

Rooms in Plan Views

Use a plan view to visually check the outer boundaries (perimeter) of a room.

By default, Revit Architecture computes the room area using the wall finish as the outer boundary. You can
specify the wall center, wall core layer, or wall core center as the outer boundary. See 

Changing the Room

Area Boundary Location

 on page 928.

Controlling the Visibility of Rooms | 915

Summary of Contents for 24000-000000-9860 - Revit Architecture - PC















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 24000-000000-9860 - Revit Architecture - PC

Canon PowerShot SD10 Digital ELPH Software Starter Manual preview
PowerShot SD10 Digital ELPH
Brand: Canon Pages: 124
Waves ABBEY ROAD THE KING'S MICROPHONES User Manual preview
ABBEY ROAD THE KING'S MICROPHONES
Brand: Waves Pages: 16
Symantec 20032623 - Endpoint Protection Small Business Edition Implementation Manual preview
20032623 - Endpoint Protection Small Business Edition
Brand: Symantec Pages: 351
F-SECURE MOBILE SECURITY 6 FOR S60 - User Manual preview
MOBILE SECURITY 6 FOR S60 -
Brand: F-SECURE Pages: 37
Novell EVOLUTION 2.6 Manual preview
EVOLUTION 2.6
Brand: Novell Pages: 126
AVG ANTI-VIRUS 2011 - REV 2011.07 User Manual preview
ANTI-VIRUS 2011 - REV 2011.07
Brand: AVG Pages: 210
AVG ANTI-VIRUS 2011 - REV 2011.06 User Manual preview
ANTI-VIRUS 2011 - REV 2011.06
Brand: AVG Pages: 210
THOMSON LCP 400 User Manual preview
LCP 400
Brand: THOMSON Pages: 22
GRASS VALLEY KAYAK HD-SD Datasheet preview
KAYAK HD-SD
Brand: GRASS VALLEY Pages: 8
GRASS VALLEY K2 FCP CONNECT - Release Note preview
K2 FCP CONNECT -
Brand: GRASS VALLEY Pages: 19
Autodesk 24108-051462-9000 - AUTOCAD REVIT ARCH STE 08 COMM NEW SLM DVD Questions And Answers preview
24108-051462-9000 - AUTOCAD REVIT ARCH STE 08 COMM NEW SLM DVD
Brand: Autodesk Pages: 11
Autodesk 057A1-05A111-10MD - AutoCAD LT 2009 Manual preview
057A1-05A111-10MD - AutoCAD LT 2009
Brand: Autodesk Pages: 31
Autodesk 12909-091452-9750 - Map 3D 2006 Student Edition Installation Manual preview
12909-091452-9750 - Map 3D 2006 Student Edition
Brand: Autodesk Pages: 35
Autodesk 057A1-05A111-10MB - AutoCAD LT 2009 Installation Manual preview
057A1-05A111-10MB - AutoCAD LT 2009
Brand: Autodesk Pages: 58
Yamaha LS9 Editor User Manual preview
LS9 Editor
Brand: Yamaha Pages: 24
IBM NETCOOL 4.3-W User Manual preview
NETCOOL 4.3-W
Brand: IBM Pages: 516
LapLink MN-LGD011-XX-US User Manual preview
MN-LGD011-XX-US
Brand: LapLink Pages: 166
Paradyne Jetstream CPX-1000 User Manual preview
Jetstream CPX-1000
Brand: Paradyne Pages: 240

Brands by name

Popular brands

Load more brands