manualshive.com logo in svg

Autodesk 24000-000000-9860 - Revit Architecture - PC, User Manual

The "Autodesk 24000-000000-9860 - Revit Architecture - PC" is a powerful design software for architects and designers. With its intuitive interface, this software enables users to create stunning building designs. Enhance your experience with the free and downloadable user manual available at manualshive.com, providing comprehensive instructions and essential tips for optimal usage.

Share
Download
background image

General Options

Click the General tab of the 

Options dialog

 to set notifications, user names, and journal file cleanup.

Notifications

■

Specify a time value for the Save Reminder interval.

■

Specify a time value for the Save to Central Reminder interval.

■

Set the ToolTip Assistance to the desired level. The default is normal. This affects how often tooltips
appear in the drawing area.

Username

■

Username is the identifier Revit Architecture associates with a particular session. The first time Revit
Architecture is run on a workstation, it uses the Windows login name as the default Username. You can
change and save the Username. In subsequent sessions on the same workstation, Revit Architecture
defaults to the saved Username, not the Windows login name.
If team members are not consistently working on the same workstations day-to-day, they must be sure
to reset the Username for each session because the default name will be that of the previous user.

In a multi-user (worksharing) Revit Architecture environment, editing permissions are based on the
Username. Two (or more) active local files (or a local file and the central file) should never be edited
under the same Username; doing so could cause the local files to be incompatible with the central file.

Journal File Cleanup

■

Specifies the number of journal files to retain.
Journal files are text documents that record each step during your Revit Architecture sessions. These files
are used primarily in the software support process. Journals can be run in order to detect a problem or
recreate lost steps or files. They are saved at the termination of each Revit Architecture session. See 

Journal

Files

 on page 72.

Graphics Options

Click the Graphics tab of the 

Options dialog

 to configure your video card for improved display performance.

On this tab you can also configure colors for selection, background, and errors.

Video Card Capabilities

Follow the instructions on the tab for video card settings.

Some of the benefits of using hardware acceleration are:

■

Faster display of large models upon refresh.

■

Switching between windows of views occurs faster with 3D graphics acceleration.

■

Creation and modification of annotations is faster.

Colors

■

Select Invert background color to toggle the display of the background of the view and the elements in
the view. For example, if you are drawing black elements in a white background, select this option and
the background becomes black and the elements appear in white.

Setting Options | 505

Summary of Contents for 24000-000000-9860 - Revit Architecture - PC















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 24000-000000-9860 - Revit Architecture - PC

Barco TouchKit Installation & User Manual preview
TouchKit
Brand: Barco Pages: 31
Yamaha S08 Voice Editor Manual preview
S08 Voice Editor
Brand: Yamaha Pages: 26
Yamaha MOTIF RACK Music System Owner'S Manual preview
MOTIF RACK Music System
Brand: Yamaha Pages: 37
Yamaha TOOLS for MY16-mLAN Installation Manual preview
TOOLS for MY16-mLAN
Brand: Yamaha Pages: 50
AMX Modero ViewPoint MVP-5100 Operation/Reference Manual preview
Modero ViewPoint MVP-5100
Brand: AMX Pages: 190
Adobe 38000827 - Macromedia ColdFusion MX Standard Edition Administration Manual preview
38000827 - Macromedia ColdFusion MX Standard Edition
Brand: Adobe Pages: 68
Netscape Certificate Management System 6.2 Administrator'S Manual preview
Certificate Management System 6.2
Brand: Netscape Pages: 874
Symantec WISE LINUX PACKAGE EDITOR 8.0 Reference preview
WISE LINUX PACKAGE EDITOR 8.0
Brand: Symantec Pages: 69
TC Electronic VSS3 Manual preview
VSS3
Brand: TC Electronic Pages: 22
Nikon 25385 - Capture NX - Mac User Manual preview
25385 - Capture NX - Mac
Brand: Nikon Pages: 268
MACROMEDIA DREAMWEAVER MX 2004-DREAMWEAVER API Reference preview
DREAMWEAVER MX 2004-DREAMWEAVER API
Brand: MACROMEDIA Pages: 486
MACROMEDIA FLASH MX 2004-ACTIONSCRIPT LANGUAGE Reference preview
FLASH MX 2004-ACTIONSCRIPT LANGUAGE
Brand: MACROMEDIA Pages: 1104
Campbell CSIOPC Instruction Manual preview
CSIOPC
Brand: Campbell Pages: 24
FARONICS SYSTEM PROFILER - Manual preview
SYSTEM PROFILER -
Brand: FARONICS Pages: 29
Intel CHIPSET - SOFTWARE INSTALLATION REVISION 1-0 - 24-04-2000 User Manual preview
CHIPSET - SOFTWARE INSTALLATION REVISION 1-0 - 24-04-2000
Brand: Intel Pages: 14
TRENDnet VIP-L25 - Datasheet preview
VIP-L25 -
Brand: TRENDnet Pages: 2
TRENDnet VIP-P64 - Datasheet preview
VIP-P64 -
Brand: TRENDnet Pages: 2
SoundToys Native Effects V 4 Getting Started preview
Native Effects V 4
Brand: SoundToys Pages: 24

Brands by name

Popular brands

Load more brands