manualshive.com logo in svg

Autodesk 24000-000000-9860 - Revit Architecture - PC, User Manual

The "Autodesk 24000-000000-9860 - Revit Architecture - PC" is a powerful design software for architects and designers. With its intuitive interface, this software enables users to create stunning building designs. Enhance your experience with the free and downloadable user manual available at manualshive.com, providing comprehensive instructions and essential tips for optimal usage.

Share
Download
background image

When you render an image, you can use light groups to turn on or off entire sets of lights, rather than
controlling lighting fixtures individually. You can also use light groups to control dimming of lights in a
rendered image.

Task lights are turned on; central light is turned off.

Central light is turned on; task lights are turned off.

Light groups are available in all relevant areas of Revit Architecture. However, settings to dim or turn on or
off light groups (or individual lighting fixtures) apply to individual 3D views only.

NOTE

The number of lights in a 3D view to be rendered can significantly increase render time. Use light groups

to turn off unnecessary lights in the view. See 

Render Performance and Lighting

 on page 1173.

Light Groups | 1135

Summary of Contents for 24000-000000-9860 - Revit Architecture - PC















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 24000-000000-9860 - Revit Architecture - PC

Barco TouchKit Installation & User Manual preview
TouchKit
Brand: Barco Pages: 31
Xerox DocuColor 6060 Installation Manual preview
DocuColor 6060
Brand: Xerox Pages: 204
FARONICS DEEP FREEZE - INTEGRATING WITH NOVELL ZENWORKS... Manual preview
DEEP FREEZE - INTEGRATING WITH NOVELL ZENWORKS...
Brand: FARONICS Pages: 23
Crestron e-control Database Manager User Manual preview
e-control Database Manager
Brand: Crestron Pages: 94
MF DIGITAL Ripstation v4.4.11.0 Operating Manual preview
Ripstation v4.4.11.0
Brand: MF DIGITAL Pages: 43
Adobe LIVE CYCLE 7.2 - INSTALLING AND CONFIGURING LIVECYCLE FOR JBOSS Manual preview
LIVE CYCLE 7.2 - INSTALLING AND CONFIGURING LIVECYCLE FOR JBOSS
Brand: Adobe Pages: 90
KAPERSKY ANTI-VIRUS 5.1 - FOR MICROSOFT ISA SERVER Administrator'S Manual preview
ANTI-VIRUS 5.1 - FOR MICROSOFT ISA SERVER
Brand: KAPERSKY Pages: 67
Red Hat ENTERPRISE LINUX WS 2.1 - Installation Manual preview
ENTERPRISE LINUX WS 2.1 -
Brand: Red Hat Pages: 110
FARONICS INSIGHT - Manual preview
INSIGHT -
Brand: FARONICS Pages: 43
FieldServer FS-8700-43 Driver Manual preview
FS-8700-43
Brand: FieldServer Pages: 28
FieldServer FS-8704-13 Driver Manual preview
FS-8704-13
Brand: FieldServer Pages: 19
3M MicroTouch MT7 User Manual preview
MicroTouch MT7
Brand: 3M Pages: 57
Xerox DocuColor 2045 Color Management Manual preview
DocuColor 2045
Brand: Xerox Pages: 60
MACROMEDIA COLDFUSION MX 61-CFML Reference preview
COLDFUSION MX 61-CFML
Brand: MACROMEDIA Pages: 806
Lenovo ThinkCentre A61 Hardware Maintenance Manual preview
ThinkCentre A61
Brand: Lenovo Pages: 408
Lenovo ThinkCentre A61e Hardware Maintenance Manual preview
ThinkCentre A61e
Brand: Lenovo Pages: 152
Lenovo ThinkCentre A58e Hardware Maintenance Manual preview
ThinkCentre A58e
Brand: Lenovo Pages: 110
Asus XONAR HDAV 1.3 Faq preview
XONAR HDAV 1.3
Brand: Asus Pages: 3

Brands by name

Popular brands

Load more brands