manualshive.com logo in svg

Autodesk 24000-000000-9860 - Revit Architecture - PC, User Manual

The "Autodesk 24000-000000-9860 - Revit Architecture - PC" is a powerful design software for architects and designers. With its intuitive interface, this software enables users to create stunning building designs. Enhance your experience with the free and downloadable user manual available at manualshive.com, providing comprehensive instructions and essential tips for optimal usage.

Share
Download
background image

Exporting to DGN

1

Click File menu

 ➤ 

Export

 ➤ 

CAD Formats.

2

In the Export dialog, for Save In, navigate to the target folder for the exported files.

3

For Files of Type, select the DGN file format.

NOTE

The DGN file format supports MicroStation version 7. If you are using a later version, export

to DWG format. See 

Exporting to DWG

 on page 1275.

4

If you are exporting a single view, do the following:

a

Under Naming, select Manual (Specify file name), or select Automatic - Long (Specify prefix)
or Automatic - Short to use an automatically generated file name. See 

File Names for Exported

Files

 on page 1278.

b

Under Range, select Current View.

5

If you are exporting multiple views and sheets, do the following:

a

Under Range, select Selected Views/Sheets.

b

Click 

 .

c

In the View/Sheet Set dialog, select the views and sheets to export, and click OK.

d

Under Naming, select Automatic - Short to use a short prefix for the names of the exported
files, or select Automatic - Long (Specify prefix) to use a longer prefix. See 

File Names for

Exported Files

 on page 1278.

6

To specify export options, click Options, select the desired options, and click OK.

For DGN files, you can specify the following options: Layer Settings and Enable DGN Template
File. See 

Export Options

 on page 1278.

NOTE

When you export (to DGN format) a 3D view that contains solid geometry, the geometry

always exports as a polymesh.

7

In the Export dialog, click Save.

Revit Architecture exports the selected views and sheets to DGN files and places them in the target folder.

Exporting to SAT

1

Click File menu

 ➤ 

Export

 ➤ 

CAD Formats.

2

In the Export dialog, for Save In, navigate to the target folder for the exported files.

3

For Files of Type, select the SAT file format.

4

If you are exporting a single view, do the following:

a

Under Naming, select Manual (Specify file name), or select Automatic - Long (Specify prefix)
or Automatic - Short to use an automatically generated file name. See 

File Names for Exported

Files

 on page 1278.

b

Under Range, select Current View.

Exporting to CAD Formats | 1277

Summary of Contents for 24000-000000-9860 - Revit Architecture - PC















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 24000-000000-9860 - Revit Architecture - PC

Aastra Venture IP Telephone System Software Manual preview
Venture IP Telephone System
Brand: Aastra Pages: 10
Native Instruments Razor Manual preview
Razor
Brand: Native Instruments Pages: 74
Xerox Wide Format 6030 Release Note preview
Wide Format 6030
Brand: Xerox Pages: 8
Xerox DocuPrint 115 System Manual preview
DocuPrint 115
Brand: Xerox Pages: 100
Netscape Certificate Management System 6.2 Administrator'S Manual preview
Certificate Management System 6.2
Brand: Netscape Pages: 874
Novell LOGIN SCRIPTS Manual preview
LOGIN SCRIPTS
Brand: Novell Pages: 64
Model Technology Model Sim EE Start Here Manual preview
Model Sim EE
Brand: Model Technology Pages: 37
Altigen AltiContact Manager Version 5.0 Administration Manual preview
AltiContact Manager Version 5.0
Brand: Altigen Pages: 542
Lowrance MapCreate 6 Install And Operation Instructions preview
MapCreate 6
Brand: Lowrance Pages: 76
Planet DrView User Manual preview
DrView
Brand: Planet Pages: 55
Pantone Goe System User Manual preview
Goe System
Brand: Pantone Pages: 12
Genius VIDEOCAM SLIMCLIP Installation Manual preview
VIDEOCAM SLIMCLIP
Brand: Genius Pages: 7
KAPERSKY ANTI-VIRUS 5.6 - FOR MICROSOFT ISA SERVER 2000 ENTERPRISE... Administrator'S Manual preview
ANTI-VIRUS 5.6 - FOR MICROSOFT ISA SERVER 2000 ENTERPRISE...
Brand: KAPERSKY Pages: 104
IBM VIAVOICE 3-FOR MAC OS X User Manual preview
VIAVOICE 3-FOR MAC OS X
Brand: IBM Pages: 96
TC Electronic PowerCore Master X3 Product Manual preview
PowerCore Master X3
Brand: TC Electronic Pages: 11
Harman Kardon SIGNATURE 2.0 Instruction & Operation Manual preview
SIGNATURE 2.0
Brand: Harman Kardon Pages: 19
Epson PowerLite 1775W Specifications preview
PowerLite 1775W
Brand: Epson Pages: 4
Epson PowerLite 1835 Brochure & Specs preview
PowerLite 1835
Brand: Epson Pages: 6

Brands by name

Popular brands

Load more brands