manualshive.com logo in svg

Autodesk 24000-000000-9860 - Revit Architecture - PC, User Manual

The "Autodesk 24000-000000-9860 - Revit Architecture - PC" is a powerful design software for architects and designers. With its intuitive interface, this software enables users to create stunning building designs. Enhance your experience with the free and downloadable user manual available at manualshive.com, providing comprehensive instructions and essential tips for optimal usage.

Share
Download
background image

Description

Name

Identity Data

The manufacturer internal number.

Model

The foundation manufacturer.

Manufacturer

A field for entering general comments about the foundation type. This information
can be included in a schedule.

Type Comments

A link to a web page that may contain type-specific information.

URL

Enter an optional description of the wall foundation.

Description

Describes the assembly based on the assembly code selection. This is a read-only
parameter.

Assembly description

A uniformat assembly code selected from a hierarchical list.

Assembly Code

A value to designate the particular foundation. This value must be unique for each
element in a project. Revit Architecture warns you when the number value is already

Type Mark

used but allows you to continue using it. You can see the warning using the Review
Warnings command. See 

Reviewing Warning Messages

 on page 1334.

The pricing of the foundation.

Cost

Wall Foundation Instance Properties - Retaining

Description

Name

Structural

Specifies the rebar cover distance from the wall top face.

Rebar Cover - Top Face

Specifies the rebar cover distance from the wall bottom face.

Rebar Cover - Bottom Face

Specifies the rebar cover distance from the wall to an adjacent element faces.

Rebar Cover - Other faces.

Specifies the estimated reinforcement volume of the selected element. This is a
read-only parameter that only displays when rebar has been placed.

Estimated Reinforcement Volume

Dimensions

Indicates the overall length. This is a read-only parameter.

Length

Indicates the overall width. This is a read-only parameter.

Width

Wall Foundation Properties | 857

Summary of Contents for 24000-000000-9860 - Revit Architecture - PC















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 24000-000000-9860 - Revit Architecture - PC

Barco TouchKit Installation & User Manual preview
TouchKit
Brand: Barco Pages: 31
AT&T OneVision DEFINITY G3 Fault Management and integration User Manual preview
OneVision DEFINITY G3 Fault Management and integration
Brand: AT&T Pages: 153
Vaisala Veriteq viewLinc 4.0 Administrator'S Manual preview
Veriteq viewLinc 4.0
Brand: Vaisala Pages: 168
Palm SmartOffice SmartOffice Mobile User Manual preview
SmartOffice SmartOffice Mobile
Brand: Palm Pages: 29
ACRONIS SNAP DEPLOY 2.0 - User Manual preview
SNAP DEPLOY 2.0 -
Brand: ACRONIS Pages: 68
Sanyo VA-SW8000 Instruction Manual preview
VA-SW8000
Brand: Sanyo Pages: 132
KINGDOM COMPUTER OPERATED VIDEO CAMERA SYSTEM Installation & User Manual preview
COMPUTER OPERATED VIDEO CAMERA SYSTEM
Brand: KINGDOM Pages: 21
GRASS VALLEY AURORA INGEST 7 Datasheet preview
AURORA INGEST 7
Brand: GRASS VALLEY Pages: 4
GRASS VALLEY Aurora Browse Upgrade Instructions preview
Aurora Browse
Brand: GRASS VALLEY Pages: 42
F-SECURE POLICY MANAGER 8.0 Administrator'S Manual preview
POLICY MANAGER 8.0
Brand: F-SECURE Pages: 221
Dresser 5 Manual preview
5
Brand: Dresser Pages: 57
FieldServer FS-8700-41 Driver Manual preview
FS-8700-41
Brand: FieldServer Pages: 48
Autodesk 15606-011408-9300 - MAP R6.3 UPG Developer'S Manual preview
15606-011408-9300 - MAP R6.3 UPG
Brand: Autodesk Pages: 208
IBM High Performance Storage System HPSS Installation Manual preview
High Performance Storage System HPSS
Brand: IBM Pages: 311
TANDBERG MOVI 4.0 - ADMINISTRATOR GUIDE 10-2010 Administrator'S Manual preview
MOVI 4.0 - ADMINISTRATOR GUIDE 10-2010
Brand: TANDBERG Pages: 23
TC Electronic TC Chorus-Delay Manual preview
TC Chorus-Delay
Brand: TC Electronic Pages: 7
HP Neoware e370 - Thin Client Quick Start Manual preview
Neoware e370 - Thin Client
Brand: HP Pages: 24
HP nld Manual preview
nld
Brand: HP Pages: 330

Brands by name

Popular brands

Load more brands