manualshive.com logo in svg

Autodesk 24000-000000-9860 - Revit Architecture - PC, User Manual

The "Autodesk 24000-000000-9860 - Revit Architecture - PC" is a powerful design software for architects and designers. With its intuitive interface, this software enables users to create stunning building designs. Enhance your experience with the free and downloadable user manual available at manualshive.com, providing comprehensive instructions and essential tips for optimal usage.

Share
Download
background image

Turning Lights On and Off

Individual lighting fixtures or entire light groups can be turned on or off to achieve the desired lighting
effects in a rendered image. When you turn on or off lights in a 3D view, the settings are saved as part of
the view properties, and they affect that view only. They do not affect rendered images for any other 3D
views.

If a lighting fixture is a nested family that is not shared, you cannot control individual light sources in the
fixture. Instead, you turn the entire lighting fixture on or off. See 

Sharing a Lighting Fixture Family

 on page

1107.

To turn lights on or off

1

Open the Artificial Lights dialog.

See 

Opening the Artificial Lights Dialog

 on page 1136.

2

In the Artificial Lights dialog, under On/Off, select individual lighting fixtures or light groups
to include them in the rendered image. Clear the check boxes to omit the lights in the rendered
image.

You can also enter values in the Dimming column to dim individual lighting fixtures or entire
light groups. See 

Dimming Lights

 on page 1134.

3

Click OK.

4

To see the results, render the image.

See 

Rendering an Image

 on page 1158.

Renaming a Light Group

1

Open the Artificial Lights dialog.

See 

Opening the Artificial Lights Dialog

 on page 1136.

2

In the Artificial Lights dialog, select the group name.

3

Under Group Options, click Rename.

4

In the Rename dialog, enter a new group name.

5

Click OK.

Deleting a Light Group

1

Open the Artificial Lights dialog.

See 

Opening the Artificial Lights Dialog

 on page 1136.

2

In the Artificial Lights dialog, select the group name.

3

Under Group Options, click Delete.

Revit Architecture deletes the light group. All of the lighting fixtures that belonged to that group are listed
under Ungrouped Lights.

Plants and Entourage

You can include plants, cars, people, and other entourage in project views. When you render a view, the
entourage is also rendered, adding realistic details to the image.

Plants and Entourage | 1139

Summary of Contents for 24000-000000-9860 - Revit Architecture - PC















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 24000-000000-9860 - Revit Architecture - PC

Panasonic PT-D10000 Series Setup And Operation Manual preview
PT-D10000 Series
Brand: Panasonic Pages: 37
Halcro RS232 Specification preview
RS232
Brand: Halcro Pages: 12
IBM ZVSE V4.2 Brochure preview
ZVSE V4.2
Brand: IBM Pages: 4
MACROMEDIA CONTRIBUTE 3-CONTRIBUTE PUBLISHING SERVER Manual preview
CONTRIBUTE 3-CONTRIBUTE PUBLISHING SERVER
Brand: MACROMEDIA Pages: 30
AVG 8.5 EMAIL SERVER EDITION - V 85.4 User Manual preview
8.5 EMAIL SERVER EDITION - V 85.4
Brand: AVG Pages: 52
Sharp PixLab Online Manual preview
PixLab
Brand: Sharp Pages: 12
AVG ANTI-VIRUS 2011 - REV 2011.11 User Manual preview
ANTI-VIRUS 2011 - REV 2011.11
Brand: AVG Pages: 209
MACROMEDIA DIRECTOR MX-USING DIRECTOR MX Use Manual preview
DIRECTOR MX-USING DIRECTOR MX
Brand: MACROMEDIA Pages: 624
ZENEC Z-EMAP50 User Manual preview
Z-EMAP50
Brand: ZENEC Pages: 80
TANDBERG MOVI D14409.01 User Manual preview
MOVI D14409.01
Brand: TANDBERG Pages: 17
Paradyne ACCULINK 7800-D1-999 Installation Manual preview
ACCULINK 7800-D1-999
Brand: Paradyne Pages: 11
Access VIRUS|POWERCORE User'S Reference Manual preview
VIRUS|POWERCORE
Brand: Access Pages: 124
Wavelink Communicator wlcug1020090331 User Manual preview
Communicator wlcug1020090331
Brand: Wavelink Pages: 67
TC Electronic Intelligent Vocal Harmony Harmony4 Manual preview
Intelligent Vocal Harmony Harmony4
Brand: TC Electronic Pages: 21
Epson Stylus pro 3800 portrait edition Specifications preview
Stylus pro 3800 portrait edition
Brand: Epson Pages: 12
Epson Stylus Pro 5500 Specifications preview
Stylus Pro 5500
Brand: Epson Pages: 2
Epson Stylus Pro 4800 Portrait Edition Brochure & Specs preview
Stylus Pro 4800 Portrait Edition
Brand: Epson Pages: 6
Epson Stylus Pro 4800 Portrait Edition Reference Manual preview
Stylus Pro 4800 Portrait Edition
Brand: Epson Pages: 396

Brands by name

Popular brands

Load more brands