manualshive.com logo in svg

Autodesk 24000-000000-9860 - Revit Architecture - PC, User Manual

The "Autodesk 24000-000000-9860 - Revit Architecture - PC" is a powerful design software for architects and designers. With its intuitive interface, this software enables users to create stunning building designs. Enhance your experience with the free and downloadable user manual available at manualshive.com, providing comprehensive instructions and essential tips for optimal usage.

Share
Download
background image

Deleting a Line Pattern

1

Click Settings menu

 ➤ 

Line Patterns.

2

In the Line Patterns dialog, select the line pattern.

3

Click Delete.

4

When prompted to confirm the deletion, click Yes.

Structural Settings

For each project, you can control the symbolic representation of structural framing components. You can
specify the symbolic cutback distance of beams and columns (see 

Cutback Default Settings

 on page 782),

brace symbols in plan, moment symbols, and analytical model adjustment. The values you specify are applied
to structural framing components throughout the project. You can also save these settings as part of a
template.

NOTE

Most of the settings in the Structural Settings dialog are available if the project was created using the

structural template.

Structural Settings Dialog

The Structural Settings dialog lets you modify settings that are specific to documentation and analysis of
structural models, specifically Symbolic Representation Settings.

Symbolic Representation Settings Tab

The values that are entered on this tab reflect the plotted representation of the drawings. Therefore, the
visible representations that are set with these values will change based on the view scale of the drawing.

Open Structural Settings dialog

1

Click Settings menu

 ➤ 

Structural Settings.

Modify symbolic cutback distance

2

On the Symbolic Representation Settings tab, enter a value for the symbolic cutback distance
for brace, and beam/truss.

This setting affects the distance between steel beams and beams/trusses, and between beams
and braces. Members must be joined to see the change in the cutback distance. Changes to this
setting are applied only to the symbolic representation of structural framing components.

Cutback distance at larger setting in coarse mode

488 | Chapter 9   Customizing Project Settings

Summary of Contents for 24000-000000-9860 - Revit Architecture - PC















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 24000-000000-9860 - Revit Architecture - PC

Aastra Venture IP Telephone System Software Manual preview
Venture IP Telephone System
Brand: Aastra Pages: 10
Native Instruments Razor Manual preview
Razor
Brand: Native Instruments Pages: 74
F-SECURE POLICY MANAGER 7.0 - Administrator'S Manual preview
POLICY MANAGER 7.0 -
Brand: F-SECURE Pages: 241
Avaya IP Agent Installation And User Manual preview
IP Agent
Brand: Avaya Pages: 286
Samsung LN32D467E1H Software Manual preview
LN32D467E1H
Brand: Samsung Pages: 1
Samsung MZ-7PC064D Specifications preview
MZ-7PC064D
Brand: Samsung Pages: 2
Samsung S1A0905-S0B0 Quick Start Manual preview
S1A0905-S0B0
Brand: Samsung Pages: 6
Samsung MZ-7PC064D User Manual preview
MZ-7PC064D
Brand: Samsung Pages: 59
Toshiba Strata CTX ACD Application Manual preview
Strata CTX ACD Application
Brand: Toshiba Pages: 1
Toshiba Strata CIX WinCIX Technical Bulletin preview
Strata CIX WinCIX
Brand: Toshiba Pages: 5
Toshiba Strata CIX SoftIPT 2.1.2 Product Bulletin preview
Strata CIX SoftIPT 2.1.2
Brand: Toshiba Pages: 5
Toshiba Strata CS Release 7.0 Sales Bulletin preview
Strata CS Release 7.0
Brand: Toshiba Pages: 8
Toshiba Strata CIX SoftIPT 2.2 Product Bulletin preview
Strata CIX SoftIPT 2.2
Brand: Toshiba Pages: 10
Toshiba Strata CTX SoftIPT Technical Bulletin preview
Strata CTX SoftIPT
Brand: Toshiba Pages: 12
Toshiba Strata CIX Database Assistant Technical Bulletin preview
Strata CIX Database Assistant
Brand: Toshiba Pages: 7
Toshiba Strata CIX SIP Trunking Product Bulletin preview
Strata CIX SIP Trunking
Brand: Toshiba Pages: 14
Toshiba STRATA CIX Net Server Administrator'S Manual preview
STRATA CIX Net Server
Brand: Toshiba Pages: 14
Toshiba IPedge R1.5 Product Bulletin preview
IPedge R1.5
Brand: Toshiba Pages: 16

Brands by name

Popular brands

Load more brands