Autodesk 24000-000000-9860 - Revit Architecture - PC, User Manual

Page: 877 / 1646

Description Name
The rotational release at the end of the brace along the local x-axis. End Mx
The rotational release at the end of the brace along the local y-axis. End My
The rotational release at the end of the brace along the local z-axis. End Mz
Used by external analysis applications to determine whether brace conditions
contribute to lateral analysis. See Analyze As
Other
Defines maximum distance of start extension parameter. Set in family para-
meters. Start Extension Calculation
Defines maximum distance of end extension parameter. Set in family paramet-
ers. End Extension Calculation
Structural Walls
The Structural Wall family type in Revit Architecture has the following possible structural usage options:
non-bearing, bearing, shear, and structural combined.
Typical structural wall
You create a wall by sketching the centerline of the wall in either a plan view or a 3D view. Revit Architecture
creates thickness, height, and other wall parameters based on the properties that are specified in the Wall
Family Type. When created, the elevation of the top of the wall is the current level, and the elevation of the
bottom of wall derives from the Base Offset value.
A structural wall differs from non-structural walls by its Structural Usage Instance Parameter. When adding
a structural wall, by default Revit Architecture sets the wall instance parameter, Structural Usage, to Bearing.
Structural Walls | 839