manualshive.com logo in svg

Autodesk 24000-000000-9860 - Revit Architecture - PC, User Manual

The "Autodesk 24000-000000-9860 - Revit Architecture - PC" is a powerful design software for architects and designers. With its intuitive interface, this software enables users to create stunning building designs. Enhance your experience with the free and downloadable user manual available at manualshive.com, providing comprehensive instructions and essential tips for optimal usage.

Share
Download
background image

For more information, see 

Creating a Baseline Linear Dimension Style

 on page 220.

4

In the drawing area, select the first point for the dimension. This is the origin.

5

Continue to select the necessary reference points.

6

When you have reached the last reference point, move the cursor away from the last element,
and click.

The baseline dimension displays.

7

To customize display of the baseline dimension:

a

In the drawing area, select the dimension.

b

Click the flip controls ( 

 ) to flip the dimension direction.

c

Press 

SPACEBAR

 to change the baseline dimension stacking. You can use the spacebar to

change the baseline dimension stacking before or after placement.

Placing Ordinate Dimensions

1

Click Drafting menu

 ➤ 

Dimension, or on the Drafting tab of the Design Bar, click Dimension.

2

On the Options Bar, click 

 (Create Aligned Dimensions) or 

 (Create Horizontal or Vertical

Dimensions).

3

In the Type Selector, select an ordinate dimension style.

For more information, see 

Creating an Ordinate Linear Dimension Style

 on page 220.

4

In the drawing area, select the first point for the dimension. This is the origin.

5

Continue to select the necessary reference points.

6

When you have reached the last reference point, move the cursor away from the last element,
and click.

The ordinate dimension displays.

Locking Permanent Dimensions

When you place permanent linear or angular dimensions, a lock control appears with the dimension. Locks
appear when you select

■

A permanent dimension.

■

An element constrained by a dimension. An element is constrained if it is referenced by a locked segment
or is a reference in an equality dimension.

If the lock is unlocked 

 , the dimension value is modifiable and the element that it references is free to

move in any direction. You can click the dimension value and change it.

If the lock is locked 

 , the dimension value is fixed, preventing any change to the distance between its

referenced components. You cannot click the dimension value to change it.

222 | Chapter 5   Using Dimensions and Constraints

Summary of Contents for 24000-000000-9860 - Revit Architecture - PC















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 24000-000000-9860 - Revit Architecture - PC

3Com IntelliJack NJ200 Supplementary Manual preview
IntelliJack NJ200
Brand: 3Com Pages: 14
IBM Nways 8260 Installation Instructions Manual preview
Nways 8260
Brand: IBM Pages: 25
Sony Ericsson Controller Mode Application Note preview
Controller Mode
Brand: Sony Ericsson Pages: 10
Waves MultiRack SoundGrid Troubleshooting Manual preview
MultiRack SoundGrid
Brand: Waves Pages: 39
Alcatel VitalQIP Specifications preview
VitalQIP
Brand: Alcatel Pages: 4
Pioneer Serato Flip User Manual preview
Serato Flip
Brand: Pioneer Pages: 11
Teltone TLE-A-01 User Manual preview
TLE-A-01
Brand: Teltone Pages: 65
Navman Smart V3 User Manual preview
Smart V3
Brand: Navman Pages: 53
Juniper STRM 2008-2 - TECHNICAL NOTE CHANGING NETWORK SETTING 6-2008 Release Note preview
STRM 2008-2 - TECHNICAL NOTE CHANGING NETWORK SETTING 6-2008
Brand: Juniper Pages: 14
EverFocus Flex1.0 User Manual preview
Flex1.0
Brand: EverFocus Pages: 123
Pfaff CREATIVE 4D EXPRESS MONOGRAM WIZARD Brochure preview
CREATIVE 4D EXPRESS MONOGRAM WIZARD
Brand: Pfaff Pages: 2
Juniper STRM 2008.2R2 - UPGRADING TO STRM 2008.2R2 REV 2 Upgrade Manual preview
STRM 2008.2R2 - UPGRADING TO STRM 2008.2R2 REV 2
Brand: Juniper Pages: 5
GRASS VALLEY JUPITER VSD Datasheet preview
JUPITER VSD
Brand: GRASS VALLEY Pages: 2
Altigen ACM 6.5 Administration Manual preview
ACM 6.5
Brand: Altigen Pages: 502
da Vinci Technologies EE Pro User Manual preview
EE Pro
Brand: da Vinci Technologies Pages: 249
FieldServer FS-8704-14 EtherNet Driver Manual preview
FS-8704-14 EtherNet
Brand: FieldServer Pages: 30
Palm Phone Link Handbook Handbook preview
Phone Link Handbook
Brand: Palm Pages: 22
NETGEAR 7200 Series Quick Installation Manual preview
7200 Series
Brand: NETGEAR Pages: 2

Brands by name

Popular brands

Load more brands