manualshive.com logo in svg

Autodesk 24000-000000-9860 - Revit Architecture - PC, User Manual

The "Autodesk 24000-000000-9860 - Revit Architecture - PC" is a powerful design software for architects and designers. With its intuitive interface, this software enables users to create stunning building designs. Enhance your experience with the free and downloadable user manual available at manualshive.com, providing comprehensive instructions and essential tips for optimal usage.

Share
Download
background image

Navigating Views

Use the ViewCube to navigate 3D views. Use SteeringWheels to navigate 2D and 3D views.

ViewCube

The ViewCube provides visual feedback of the current orientation of a model. You can use the ViewCube
to adjust the viewpoint of the model.

Overview of the ViewCube

The ViewCube is a 3D navigation tool that appears in all 3D views .

Once the ViewCube is displayed, it appears in the top-right corner  of the drawing area over the model in
an inactive state. While the ViewCube is inactive, it displays the current viewpoint of the model based on
the North direction of the model. When you position the cursor over the ViewCube, it becomes active. You
can switch to one of the available preset views, roll the current view, or change to the Home view of the
model.

Control the Appearance of the ViewCube

The ViewCube is displayed in one of two states: inactive and active. When the ViewCube is inactive, it
appears partially transparent over the drawing area by default to not completely obscure the view of the
model. If the ViewCube is active, it appears opaque and obscures the view of the objects in the model.

In addition to controlling the opacity level of the ViewCube when it is inactive, you can also control its size,
on-screen position, and the display of the compass. The settings used to control the appearance of the
ViewCube are located in the ViewCube Options dialog box.

Using the Compass

The compass for the ViewCube indicates which direction North is defined in for the model. North in the
ViewCube compass refers to True North, not Project North. The display of the compass below the ViewCube
is controlled through the ViewCube Options dialog box.

To control the position of the ViewCube

1

Right-click on the ViewCube and click Options.

2

In the ViewCube Options dialog box, under ViewCube Appearance, select one of the available positions
from the On-screen Position drop-down list.

3

Click OK.

To control the size of the ViewCube

1

Right-click on the ViewCube and click Options.

Navigating Views | 169

Summary of Contents for 24000-000000-9860 - Revit Architecture - PC















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 24000-000000-9860 - Revit Architecture - PC

Samsung 4116 - SCX B/W Laser Manual preview
4116 - SCX B/W Laser
Brand: Samsung Pages: 14
Samsung 2252W - Printer - B/W Manual preview
2252W - Printer - B/W
Brand: Samsung Pages: 10
Yamaha CL1 Owner'S Manual preview
CL1
Brand: Yamaha Pages: 89
IBM System Storage DS3000 Installation Manual preview
System Storage DS3000
Brand: IBM Pages: 38
Lexmark LexPrint User Manual preview
LexPrint
Brand: Lexmark Pages: 20
Sybase Adaptive Server Anywhere SNMP Extension Agent User Manual preview
Adaptive Server Anywhere SNMP Extension Agent
Brand: Sybase Pages: 70
Avaya IP Office CTI Link Programmer'S Manual preview
IP Office CTI Link
Brand: Avaya Pages: 28
YOKOGAWA 735070 Operation Manual preview
735070
Brand: YOKOGAWA Pages: 29
Lenovo Active Protection System Manual preview
Active Protection System
Brand: Lenovo Pages: 10
Lenovo Aptiva Hardware Maintenance Manual preview
Aptiva
Brand: Lenovo Pages: 464
Lenovo ACTIVATION Error Code List preview
ACTIVATION
Brand: Lenovo Pages: 3
Toshiba Strata CTX ACD Application Manual preview
Strata CTX ACD Application
Brand: Toshiba Pages: 1
Toshiba Strata CIX WinCIX Technical Bulletin preview
Strata CIX WinCIX
Brand: Toshiba Pages: 5
Toshiba Strata CIX SoftIPT 2.1.2 Product Bulletin preview
Strata CIX SoftIPT 2.1.2
Brand: Toshiba Pages: 5
Toshiba Strata CS Release 7.0 Sales Bulletin preview
Strata CS Release 7.0
Brand: Toshiba Pages: 8
Toshiba Strata CIX SoftIPT 2.2 Product Bulletin preview
Strata CIX SoftIPT 2.2
Brand: Toshiba Pages: 10
Toshiba Strata CTX SoftIPT Technical Bulletin preview
Strata CTX SoftIPT
Brand: Toshiba Pages: 12
Toshiba Strata CIX Database Assistant Technical Bulletin preview
Strata CIX Database Assistant
Brand: Toshiba Pages: 7

Brands by name

Popular brands

Load more brands