manualshive.com logo in svg

Autodesk 24000-000000-9860 - Revit Architecture - PC, User Manual

The "Autodesk 24000-000000-9860 - Revit Architecture - PC" is a powerful design software for architects and designers. With its intuitive interface, this software enables users to create stunning building designs. Enhance your experience with the free and downloadable user manual available at manualshive.com, providing comprehensive instructions and essential tips for optimal usage.

Share
Download
background image

NOTE

When you select Fit to Window and the Far Clipping parameter is active (either set to Clip without Line

or Clip with Line), it will be disabled. You can use the Rewind tool to return to a view where the Far Clipping
parameter was active, or you can enable the property again through the Element Properties dialog for the
view. For more information on the Far Clipping parameter, see 

Cutting an Elevation, Section, or Callout View

by the Far Clip Plane

 on page 87.

■

Restore Original Center.

 Restores the center point of the view to the extents of the model.

■

Orient to View.

 Orients the camera to match the view angle of the selected view (a plan, elevation,

section, or 3D view).

■

Orient to a Plane.

 Adapts the view according to a specific plane.

■

Save View.

 Saves the current view orientation with a unique name.

NOTE

Save View only allows you to save a 3D view with a unique name when you are viewing the default 3D

view. If you are viewing a previously saved orthographic 3D view or a perspective (camera) 3D view, the view
is simply saved with the new orientation and you are not prompted to supply a unique name.

■

Increase/Decrease Focal Length.

 Acts as a zoom lens on the model, because it changes the focal length

of the camera in a perspective view.

■

Move Crop Boundary. 

Moves the position of the crop boundary around in a perspective view.

■

Re-center Crop Boundary.

 Repositions the crop boundary to the center of the perspective view.

■

Help.

 Launches the online Help system and displays the topic about the wheels.

■

Options.

 Displays the dialog box where you can adjust the preferences for the wheels.

To display the wheel menu

■

Click the down arrow in the lower-right corner of the wheel or right-click on the wheel.

Navigation Wheels

You can choose from several different wheels. Each has its own drafting theme. Some wheels are designed
for 2D navigation while other wheels are better suited for 3D navigation.

Wheels are available in two sizes: big and mini. The big wheel is larger than the cursor. A label is on each
wedge in the wheel. The mini wheel is about the same size as the cursor. Labels are not displayed on the
wheel wedges. The 2D Navigation wheel is only available in a big version.

You can choose from the following wheels:

■

2D Navigation

■

View Object

■

Tour Building

■

Full Navigation

2D Navigation Wheel

The 2D Navigation wheel is for basic navigation of 2D views.

SteeringWheels | 179

Summary of Contents for 24000-000000-9860 - Revit Architecture - PC















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 24000-000000-9860 - Revit Architecture - PC

VMware CLOUD DIRECTOR 1.0 Using preview
CLOUD DIRECTOR 1.0
Brand: VMware Pages: 3
VMware VmWare ESX Server 2.12 Deployment Deployment Manual preview
VmWare ESX Server 2.12 Deployment
Brand: VMware Pages: 34
VMware VCM 5.3 Manual preview
VCM 5.3
Brand: VMware Pages: 34
3Com 10031370-01 Setup Manual preview
10031370-01
Brand: 3Com Pages: 44
3Com Network HotSync Handbook preview
Network HotSync
Brand: 3Com Pages: 38
3Com CommWorks 5210 User Manual preview
CommWorks 5210
Brand: 3Com Pages: 144
F-SECURE MOBILE SECURITY 3.1 FOR S60 User Manual preview
MOBILE SECURITY 3.1 FOR S60
Brand: F-SECURE Pages: 31
UNIBLUE DRIVERSCANNER 2009 Manual preview
DRIVERSCANNER 2009
Brand: UNIBLUE Pages: 62
da Vinci Technologies EE Pro User Manual preview
EE Pro
Brand: da Vinci Technologies Pages: 249
Janome Artistic Suite V6 Manual preview
Artistic Suite V6
Brand: Janome Pages: 5
Ulead MEDIASTUDIO PRO 8.0 - SMART COMPOSITOR... User Manual preview
MEDIASTUDIO PRO 8.0 - SMART COMPOSITOR...
Brand: Ulead Pages: 308
Magellan DirectRoute 3.0 Quick Start Manual preview
DirectRoute 3.0
Brand: Magellan Pages: 108
Jensen NVX200 - Touch&Go - Automotive GPS Receiver User Manual preview
NVX200 - Touch&Go - Automotive GPS Receiver
Brand: Jensen Pages: 86
Echo Audio Indigo DJx Owner'S Manual preview
Indigo DJx
Brand: Echo Audio Pages: 35
Samsung SCX-4720F Manual preview
SCX-4720F
Brand: Samsung Pages: 34
Samsung PS63A756T1M Quick Manual preview
PS63A756T1M
Brand: Samsung Pages: 13
MACROMEDIA FLASH MX 2004-FLASH JAVASCRIPT DICTIONARY Manual preview
FLASH MX 2004-FLASH JAVASCRIPT DICTIONARY
Brand: MACROMEDIA Pages: 386
Sans Digital Web GUI RAID Management Tools Default Setting preview
Web GUI RAID Management Tools
Brand: Sans Digital Pages: 1

Brands by name

Popular brands

Load more brands