manualshive.com logo in svg

Autodesk 24000-000000-9860 - Revit Architecture - PC, User Manual

The "Autodesk 24000-000000-9860 - Revit Architecture - PC" is a powerful design software for architects and designers. With its intuitive interface, this software enables users to create stunning building designs. Enhance your experience with the free and downloadable user manual available at manualshive.com, providing comprehensive instructions and essential tips for optimal usage.

Share
Download
background image

Description

Name

Applies to concrete columns only. Sets the rebar cover distance from the column
top face.

Rebar Cover - Top Face

Applies to concrete columns only. Sets the rebar cover distance from the column
bottom face.

Rebar Cover - Bottom Face

Applies to concrete columns only. Sets the rebar cover distance from the column
to other element faces.

Rebar Cover - Other faces.

Specifies the estimated reinforcement volume of the selected element. This is a
read-only parameter that only displays when rebar has been placed.

Estimated Reinforcement Volume

Dimensions

Volume of the selected column, is a read-only value.

Volume

Identity Data

User comments.

Comments

A label created for the column. Possible use: shop mark. This value must be unique
for each element in a project. Revit Architecture warns you if the number is already

Mark

used but allows you to continue using it. You can see the warning using the Review
Warnings command. For more information, see 

Reviewing Warning Messages

 on

page 1334.

Phasing

Indicates in which phase the column component was created. For more information,
see 

Project Phasing

 on page 1263.

Phase Created

Indicates in which phase the column component was demolished. For more inform-
ation, see 

Project Phasing

 on page 1263.

Phase Demolished

Structural Analysis

Either fixed, Pinned, Bending Moment or User-Defined. User-Defined allows you
to enable/disable each of the top release conditions.

Top Release

Translational release at the top end of the column along the x-axis.

Top Fx

Translational release at the top end of the column along the y-axis.

Top Fy

Translational release at the top end of the column along the z-axis.

Top Fz

Rotational release at the top end of the column along the x-axis.

Top Mx

Structural Column Properties | 765

Summary of Contents for 24000-000000-9860 - Revit Architecture - PC















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 24000-000000-9860 - Revit Architecture - PC

Yamaha CL1 Owner'S Manual preview
CL1
Brand: Yamaha Pages: 89
KAPERSKY ADMINISTRATION KIT 6.0 Administrator'S Manual preview
ADMINISTRATION KIT 6.0
Brand: KAPERSKY Pages: 115
Olympus E-20 - Dual Monaural Earphones Software Installation Manual preview
E-20 - Dual Monaural Earphones
Brand: Olympus Pages: 2
Paradyne Jetstream CPX-1000 Installation Manual preview
Jetstream CPX-1000
Brand: Paradyne Pages: 93
Waves ABBEY ROAD THE KING'S MICROPHONES User Manual preview
ABBEY ROAD THE KING'S MICROPHONES
Brand: Waves Pages: 16
Novell LINUX ENTERPRISE DESKTOP 11 - KDE Manual preview
LINUX ENTERPRISE DESKTOP 11 - KDE
Brand: Novell Pages: 102
Palm SmartOffice SmartOffice Mobile User Manual preview
SmartOffice SmartOffice Mobile
Brand: Palm Pages: 29
Native Instruments Reaktor Spark Manual preview
Reaktor Spark
Brand: Native Instruments Pages: 38
JVC Blank Media LYT1015 Instructions Manual preview
Blank Media LYT1015
Brand: JVC Pages: 22
JVC ImageMixer 1.7 Instructions Manual preview
ImageMixer 1.7
Brand: JVC Pages: 43
JVC JLIP VIDEO CAPTURE Instructions Manual preview
JLIP VIDEO CAPTURE
Brand: JVC Pages: 56
JVC GR-DVL500U - Digital Camcorder Instructions Manual preview
GR-DVL500U - Digital Camcorder
Brand: JVC Pages: 72
JVC GZMG27US - Everio Camcorder - 680 KP Instructions Manual preview
GZMG27US - Everio Camcorder - 680 KP
Brand: JVC Pages: 72
JVC GZ-MG77U - Everio Camcorder - 2.18 MP Instructions Manual preview
GZ-MG77U - Everio Camcorder - 2.18 MP
Brand: JVC Pages: 72
JVC Digital Photo Navigator ImageMixer with VCD LYT1116-001A Instructions Manual preview
Digital Photo Navigator ImageMixer with VCD LYT1116-001A
Brand: JVC Pages: 50
JVC GZMG21US - Everio Camcorder - 680 KP Instructions Manual preview
GZMG21US - Everio Camcorder - 680 KP
Brand: JVC Pages: 72
Red Hat CLUSTER SUITE FOR ENTERPRISE LINUX 5.1 Tuning Manual preview
CLUSTER SUITE FOR ENTERPRISE LINUX 5.1
Brand: Red Hat Pages: 160
Gallo Studio Devil User Manual preview
Studio Devil
Brand: Gallo Pages: 9

Brands by name

Popular brands

Load more brands