manualshive.com logo in svg

Autodesk 24000-000000-9860 - Revit Architecture - PC, User Manual

The "Autodesk 24000-000000-9860 - Revit Architecture - PC" is a powerful design software for architects and designers. With its intuitive interface, this software enables users to create stunning building designs. Enhance your experience with the free and downloadable user manual available at manualshive.com, providing comprehensive instructions and essential tips for optimal usage.

Share
Download
background image

4

Select the desired options:

■

Group And Associate

: Includes each member of the array in a group. If not selected, Revit

Architecture creates the specified number of copies and does not group them. Once placed,
each copy acts independently of the others.

■

Number

: Specifies the total number of copies (of the selected elements) in the array.

■

Move To

:

■

2nd

: Specifies the spacing between each member of the array. Additional array members

appear after the second member.

■

Last:

 Specifies the entire span of the array. Array members are evenly spaced between the

first member and the last member.

■

Constrain

: Restricts movement of array members along vectors that run perpendicular or

collinear to the selected elements.

NOTE

You cannot group together detail components and model components.

5

If you selected Move To 2nd, place array members as follows:

a

Click in the drawing area to indicate a starting point for measuring.

b

Move the cursor the desired distance between members. As you move the cursor, a box
appears to indicate the size of the selected elements. The box moves along snap points. A
dimension appears between the first click location and the current cursor position.

c

Click again to place the second member, or type a dimension and press 

ENTER

.

6

If you selected Move To Last, place array members as follows:

a

Click in the drawing area to indicate a starting point for measuring.

b

Move the cursor to the desired location for the last array member. As you move the cursor,
a box appears to indicate the size of the selected elements. The box moves along snap
points. A dimension appears between the first click location and the current cursor position.

c

Click again to place the last member, or specify a dimension and press 

ENTER

.

7

If you selected Group and Associate on the Options Bar, a number box appears, indicating the
number of copies to create in the array. If desired, change the number and press 

ENTER

.

Revit Architecture creates the specified number of copies of the selected elements, and places them using
the appropriate spacing.

Placing the first and second items in a linear array

296 | Chapter 7   Editing Elements

Summary of Contents for 24000-000000-9860 - Revit Architecture - PC















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 24000-000000-9860 - Revit Architecture - PC

Canon EOS-1D Mark II Digial Software Manual preview
EOS-1D Mark II Digial
Brand: Canon Pages: 2
Campbell BMP5 Direct SDK Instruction Manual preview
BMP5 Direct SDK
Brand: Campbell Pages: 32
TANDBERG MPS API Interface D13639 User Manual preview
MPS API Interface D13639
Brand: TANDBERG Pages: 84
MACROMEDIA ClusterCATS Use Manual preview
ClusterCATS
Brand: MACROMEDIA Pages: 156
Sigma PHOTO PRO 4.2 Manual preview
PHOTO PRO 4.2
Brand: Sigma Pages: 55
MACROMEDIA FLEX - DEVELOPING COMPONENTS AND THEMES Manual preview
FLEX - DEVELOPING COMPONENTS AND THEMES
Brand: MACROMEDIA Pages: 82
Alarm Lock User Access Control (UAC) in Windows® Vista Tech Note preview
User Access Control (UAC) in Windows® Vista
Brand: Alarm Lock Pages: 2
Lucent Technologies CentreVu User Manual preview
CentreVu
Brand: Lucent Technologies Pages: 198
Steinberg TOOLS for CMC Installation Manual preview
TOOLS for CMC
Brand: Steinberg Pages: 1
Crestron Active CNX Tutorial preview
Active CNX
Brand: Crestron Pages: 12
M-Audio Pro Tools M-Powered 7 Quick Start Manual preview
Pro Tools M-Powered 7
Brand: M-Audio Pages: 74
Gallo Studio Devil User Manual preview
Studio Devil
Brand: Gallo Pages: 9
3Com Traffix Transcend Traffix Manager User Manual preview
Traffix Transcend Traffix Manager
Brand: 3Com Pages: 186
AMX AXD-CP4/A Specifications preview
AXD-CP4/A
Brand: AMX Pages: 3
Autodesk 225A1-05A111-1001 - AutoCAD Electrical 2009 Getting Started preview
225A1-05A111-1001 - AutoCAD Electrical 2009
Brand: Autodesk Pages: 255
Red Hat ENTERPRISE LINUX AS 2.1 - Installation Manual preview
ENTERPRISE LINUX AS 2.1 -
Brand: Red Hat Pages: 210
Red Hat ENTERPRISE LINUX 5.3 - RELEASE MANIFEST Release Note preview
ENTERPRISE LINUX 5.3 - RELEASE MANIFEST
Brand: Red Hat Pages: 240
LaCie 131018 - StorView Snapshot - Mac User Manual preview
131018 - StorView Snapshot - Mac
Brand: LaCie Pages: 214

Brands by name

Popular brands

Load more brands