Autodesk 24000-000000-9860 - Revit Architecture - PC, User Manual

Page: 688 / 1646

Description Name
Sets a floor line to slope-defining. This parameter is enabled when the Defines Constant Height property
is turned on. Defines slope
Enables a floor line to have a constant height above the level on which it is sketched. This property is
for defining slope. For example, to define slope you can set 2 parallel lines to be at a constant height Defines Constant
Height
and then set an offset for each line, or you can set a single line to be at a constant height, slope defining,
and then set its slope. See
Sloped Floors on page 643.
Sets the height of the floor line above the level on which it is sketched. The default value is 0. This
parameter is enabled when the Defines constant height property is set to yes. Offset from Base
Determines whether the offset is measured from the wall core. Extend into wall
(to core)
Graphics
If the floor sketch line is an arc, specifies whether the center mark for the arc appears. You can dimension
to the center mark of an arc. Center Mark Vis-
ible
Dimensions
Sets the slope angle for the selected floor line. The default value is 0. This parameter is enabled when
Defines Slope Property is turned on. Slope
The actual length of a sketch line for the floor. This is a read-only property. Length
Identity Data
If design options have been created, this property indicates the design option in which the element
exists. For more information on design options, see
Design Options on page 1237.
Design Option
Other
Offsets the floor a specified distance from a bounding wall. Wall Offset
Floor Slope Arrow Properties
Description Name
Constraints
Indicates the method for determining slope. Specify
Starts the slope arrow at the designated level. Level at Tail
650 | Chapter 11 Working with Architectural Components