Autodesk 24000-000000-9860 - Revit Architecture - PC, User Manual

Page: 639 / 1646

4 When you are finished, click OK.
Wall Reveal Type Properties
Description Name
Constraints
A length value whose default is 0.0. When set to positive or negative values, the
ends of the wall reveal curve pull back or push forward by the designated amount Default Setback
when they are interrupted at an insert. This allows you to quickly set wall reveals
properly near window or door trims. This value is overwritten when you pull the
ends manually.
Construction
The profile family used to create the reveal. Profile
Wall Reveal Instance Properties
Description Name
Constraints
The distance from the wall face. This setting changes the depth of the reveal. Offset from wall
The reveal's level. This property only appears with horizontal reveals. Level
The reveal's offset from the level. This property only appears with horizontal reveals. Offset from level
Dimensions
The length of the reveal. Length
Modifying Walls
After creating a wall, you can modify it by changing the wall type or resizing the wall.
Changing Wall Types
When you activate the Wall command to place walls, you can use the Type Selector to select different types
of walls.
Modifying Walls | 601