manualshive.com logo in svg

Autodesk 24000-000000-9860 - Revit Architecture - PC, User Manual

The "Autodesk 24000-000000-9860 - Revit Architecture - PC" is a powerful design software for architects and designers. With its intuitive interface, this software enables users to create stunning building designs. Enhance your experience with the free and downloadable user manual available at manualshive.com, providing comprehensive instructions and essential tips for optimal usage.

Share
Download
background image

The Crop Region Size dialog opens.

3

If you are modifying a crop region in a perspective 3D view, select either Field of view or Scale
(locked proportions). Examples of these modes are provided at the end of this procedure.

4

Modify the values for width and height.

NOTE

If you selected Scale for a perspective 3D view, you can only modify either height or width,

because the values are locked.

5

Modify the offset values for the annotation crop.

Annotation crop options are not available for perspective 3D views.

6

Click Apply to make the changes, or click OK to make the changes and close the dialog.

The width and height values for the model crop region appear on the Options Bar.

There are 2 modes for resizing the crop region: Field of View mode and Scale mode.

■

In Field of View mode, you are stretching the crop region to the specified size. For example, if you change
a crop region from 100 mm wide by 75 mm high to 50 mm wide by 25 mm high, the crop region updates
accordingly. Field of View mode is for perspective and non-perspective views.

■

In Scale mode, you change either the height or the width, and Revit Architecture maintains the aspect
ratio. When you change the value, the view scales, but the field of view remains the same. Scale mode
is for perspective views only.
In the following image, the eye elevation is 7500 mm.

Here is the result of modifying the eye elevation height to 22500 mm.

Rotating Views

You can rotate section views, scope boxes, and viewports using the Rotate command. You can also rotate a
crop region, which in effect rotates a view.

For information on rotating a project to True North, see 

Rotating a Project to True North

 on page 1234.

Rotating Views | 167

Summary of Contents for 24000-000000-9860 - Revit Architecture - PC















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 24000-000000-9860 - Revit Architecture - PC

F-SECURE PSB Getting Started Manual preview
PSB
Brand: F-SECURE Pages: 18
Garmin GNC 420 Instructions Manual preview
GNC 420
Brand: Garmin Pages: 6
Novell LOGIN SCRIPTS Manual preview
LOGIN SCRIPTS
Brand: Novell Pages: 64
ACRONIS DISK DIRECTOR SUITE 10 User Manual preview
DISK DIRECTOR SUITE 10
Brand: ACRONIS Pages: 127
Red Hat NETWORK BASIC - USER REFERENCE GUIDE 3.2 User Reference Manual preview
NETWORK BASIC - USER REFERENCE GUIDE 3.2
Brand: Red Hat Pages: 76
RedMoon Music maxWerk User Manual preview
maxWerk
Brand: RedMoon Music Pages: 74
Garmin Pilot for Android User Manual preview
Pilot for Android
Brand: Garmin Pages: 150
Red Hat CERTIFICATE SYSTEM 6.0 - MIGRATION GUIDE Manual preview
CERTIFICATE SYSTEM 6.0 - MIGRATION GUIDE
Brand: Red Hat Pages: 76
ZyXEL Communications IPSEC VPN CLIENT Brochure preview
IPSEC VPN CLIENT
Brand: ZyXEL Communications Pages: 2
Texas Instruments NoteFolio Software Manual preview
NoteFolio
Brand: Texas Instruments Pages: 37
Oracle Application 9i Configuration Manual preview
Application 9i
Brand: Oracle Pages: 140
Oracle Secure Backup 10.3 Installation And Configuration Manual preview
Secure Backup 10.3
Brand: Oracle Pages: 174
QMS CF 2215 User Manual preview
CF 2215
Brand: QMS Pages: 50
MACROMEDIA FIREWORKS 8-USING FIREWORKS Use Manual preview
FIREWORKS 8-USING FIREWORKS
Brand: MACROMEDIA Pages: 472
IBM PERFORMANCE MANAGEMENT FOR POWER SYSTEMS - INTERACTIVE GRAPHING SUPPORT FOR ... Manual preview
PERFORMANCE MANAGEMENT FOR POWER SYSTEMS - INTERACTIVE GRAPHING SUPPORT FOR ...
Brand: IBM Pages: 29
AVIRA ANTIVIR VSA Configuration preview
ANTIVIR VSA
Brand: AVIRA Pages: 25
Cisco TELEPRESENCE CALL DETAIL RECORDS FILE FORMAT - Reference Manual preview
TELEPRESENCE CALL DETAIL RECORDS FILE FORMAT -
Brand: Cisco Pages: 26
Autodesk 23802-091408-9325 - UPG DWF COMPOSER 2 Getting Started Manual preview
23802-091408-9325 - UPG DWF COMPOSER 2
Brand: Autodesk Pages: 56

Brands by name

Popular brands

Load more brands