manualshive.com logo in svg

Autodesk 24000-000000-9860 - Revit Architecture - PC, User Manual

The "Autodesk 24000-000000-9860 - Revit Architecture - PC" is a powerful design software for architects and designers. With its intuitive interface, this software enables users to create stunning building designs. Enhance your experience with the free and downloadable user manual available at manualshive.com, providing comprehensive instructions and essential tips for optimal usage.

Share
Download
background image

Description

Name

A value that designates the particular beam; possibly the shop mark. This value must
be unique for each element in a project. Revit Architecture warns you if the number

Type Mark

is already used but allows you to continue using it. You can see the warning using
the Review Warnings command. For more information, see 

Reviewing Warning

Messages

 on page 1334.

The pricing of the column.

Cost

Structural Column Instance Properties

The following instance properties apply to column families that load during a typical installation. The
properties will vary depending on the column families that are specified during the installation process.

Description

Name

Constraints

Constraining level of the column base.

Base Level

Offset of base from base level.

Base Offset

Constraining level of the column top.

Top Level

Offset of top from top level.

Top Offset

Toggles column constraint to grid. See 

Locking Columns to a Grid

 on page 761.

Moves With Grids

Toggles column constraint to room bounding conditions.

Room Bounding

Graphics

Applies to steel columns only. Turns on the visibility of a moment or shear connec-
tion symbol. The symbols are visible only in elevations and cuts parallel to the main
axis of the column in coarse view.

Top Connection Symbol

Applies to steel columns only. Turns on the visibility of the base plate symbol. The
symbols are visible only in elevations and cuts parallel to the main axis of the column
in coarse view.

Base Plate Symbol

Materials and Finishes

Structural material. For more information, see 

Material Physical Type Parameters

on page 480.

Column Material

Structural

764 | Chapter 12   Working with Structural Components

Summary of Contents for 24000-000000-9860 - Revit Architecture - PC















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 24000-000000-9860 - Revit Architecture - PC

Alcatel neopost UK Manual preview
neopost UK
Brand: Alcatel Pages: 4
Teklynx Discover ActiveX Programmer'S Manual preview
Discover ActiveX
Brand: Teklynx Pages: 165
Fender G-DEC 3 MUSTANG FUSE 2-0 Manual preview
G-DEC 3 MUSTANG FUSE 2-0
Brand: Fender Pages: 12
Red Hat CLUSTER SUITE 4.7 DM MULTIPATH Configuration And Administration Manual preview
CLUSTER SUITE 4.7 DM MULTIPATH
Brand: Red Hat Pages: 38
Access ATOMIZER Operator'S Manual preview
ATOMIZER
Brand: Access Pages: 16
GRASS VALLEY AURORA PLAYOUT 7 Datasheet preview
AURORA PLAYOUT 7
Brand: GRASS VALLEY Pages: 4
GRASS VALLEY AURORA EDIT 7 Datasheet preview
AURORA EDIT 7
Brand: GRASS VALLEY Pages: 4
Tech Source RAPTOR 1000 - OPENWINDOWS FOR SOLARIS INSTALLATION-REFERENCE Installation And Reference Manual preview
RAPTOR 1000 - OPENWINDOWS FOR SOLARIS INSTALLATION-REFERENCE
Brand: Tech Source Pages: 68
GRASS VALLEY HDSTORM Datasheet preview
HDSTORM
Brand: GRASS VALLEY Pages: 4
GRASS VALLEY K2 FCP CONNECT - Installation Manual preview
K2 FCP CONNECT -
Brand: GRASS VALLEY Pages: 52
UNIBLUE DriverScanner 2010 Product Manual preview
DriverScanner 2010
Brand: UNIBLUE Pages: 12
Microtek ScanMaker X6 EPP User Manual preview
ScanMaker X6 EPP
Brand: Microtek Pages: 15
Microtek ScanPotter Reference Manual preview
ScanPotter
Brand: Microtek Pages: 36
FARONICS DEEP FREEZE - SMS INTEGRATION 8-2006 Manual preview
DEEP FREEZE - SMS INTEGRATION 8-2006
Brand: FARONICS Pages: 10
Brother PE-Design Next Installation Manual preview
PE-Design Next
Brand: Brother Pages: 16
Brother PE-DESIGN V7 Instruction Manual preview
PE-DESIGN V7
Brand: Brother Pages: 361
Brother PEDESIGN 7.0 Quick Reference Manual preview
PEDESIGN 7.0
Brand: Brother Pages: 50
3D Nord magicolor 2590MF Reference Manual preview
magicolor 2590MF
Brand: 3D Nord Pages: 198

Brands by name

Popular brands

Load more brands