manualshive.com logo in svg

Autodesk 24000-000000-9860 - Revit Architecture - PC, User Manual

The "Autodesk 24000-000000-9860 - Revit Architecture - PC" is a powerful design software for architects and designers. With its intuitive interface, this software enables users to create stunning building designs. Enhance your experience with the free and downloadable user manual available at manualshive.com, providing comprehensive instructions and essential tips for optimal usage.

Share
Download
background image

Creating an Area Scheme

1

Click Settings menu

 ➤ 

Area and Volume Computations.

2

In the Area and Volume Computations dialog, click the Area Schemes tab.

3

Click New.

4

For Name, enter a name for the new area scheme.

5

For Description, enter a description of the new area scheme.

6

Click OK.

Deleting an Area Scheme

NOTE

If you delete an area scheme, all area plans associated with that scheme are also deleted.

1

Click Settings menu

 ➤ 

Area and Volume Computations.

2

In the Area and Volume Computations dialog, click the Area Schemes tab.

3

Select the area scheme.

4

Click Delete.

5

Click OK.

Area Plans

Area plans are views that show spatial relationships based on area schemes and levels in your model. You
can have multiple area plans for every area scheme and level. Each area plan can have distinct area boundaries,
tags, and color schemes.

Area plans are listed in the Area Plans node of the Project Browser. You can rename area plans. In the Project
Browser, the area plan name indicates the level associated with the plan.

Create area schemes before creating area plans. See 

Creating an Area Scheme

 on page 946.

Area plan with area scheme applied

Creating an Area Plan

1

Click View menu

 ➤ 

New

 ➤ 

Area Plan, or on the Room and Area tab of the Design Bar, click Area

Plan.

2

In the New Area Plan dialog, for Type, select an area scheme.

946 | Chapter 14   Rooms and Areas

Summary of Contents for 24000-000000-9860 - Revit Architecture - PC















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 24000-000000-9860 - Revit Architecture - PC

AMIGOPOD AMIGOPOD 0.99.35 Integration Manual preview
AMIGOPOD 0.99.35
Brand: AMIGOPOD Pages: 23
AMIGOPOD AMIGOPOD Integration Manual preview
AMIGOPOD
Brand: AMIGOPOD Pages: 47
Red Hat CLUSTER SUITE FOR ENTERPRISE LINUX 4.7 Overview preview
CLUSTER SUITE FOR ENTERPRISE LINUX 4.7
Brand: Red Hat Pages: 78
Promise Technology FastTrak SX Series Version 4.4 User Manual preview
FastTrak SX Series Version 4.4
Brand: Promise Technology Pages: 102
TROY Group IRD 2300 Quick Start Manual preview
IRD 2300
Brand: TROY Group Pages: 10
IBM Keyboard Optimizer User Manual preview
Keyboard Optimizer
Brand: IBM Pages: 5
National Instruments BridgeVIEW User Manual preview
BridgeVIEW
Brand: National Instruments Pages: 455
FARONICS DEEP FREEZE STANDARD - 1-2010 Manual preview
DEEP FREEZE STANDARD - 1-2010
Brand: FARONICS Pages: 24
Samsung CLX 3160FN - Color Laser - All-in-One Manual preview
CLX 3160FN - Color Laser - All-in-One
Brand: Samsung Pages: 36
Belkin n52te - Nostromo SpeedPad Game Pad User Manual preview
n52te - Nostromo SpeedPad Game Pad
Brand: Belkin Pages: 21
Lenovo Y300 User Manual preview
Y300
Brand: Lenovo Pages: 63
Lenovo Y710 - IdeaPad - Pentium Dual Core 1.86 GHz Quick Setup preview
Y710 - IdeaPad - Pentium Dual Core 1.86 GHz
Brand: Lenovo Pages: 2
Lenovo ThinkStation S20 Hardware Manual preview
ThinkStation S20
Brand: Lenovo Pages: 264
Lenovo Z61t Hardware Maintenance Manual preview
Z61t
Brand: Lenovo Pages: 172
Autodesk REVIT ARCHITECTURE 2010 Brochure preview
REVIT ARCHITECTURE 2010
Brand: Autodesk Pages: 6
MACROMEDIA FLASH 8-FLASH Reference preview
FLASH 8-FLASH
Brand: MACROMEDIA Pages: 162
Yamaha AE051 Owner'S Manual preview
AE051
Brand: Yamaha Pages: 7
Western Digital Data Lifeguard Diagnostic Utility User Manual preview
Data Lifeguard Diagnostic Utility
Brand: Western Digital Pages: 21

Brands by name

Popular brands

Load more brands