manualshive.com logo in svg

Autodesk 24000-000000-9860 - Revit Architecture - PC, User Manual

The "Autodesk 24000-000000-9860 - Revit Architecture - PC" is a powerful design software for architects and designers. With its intuitive interface, this software enables users to create stunning building designs. Enhance your experience with the free and downloadable user manual available at manualshive.com, providing comprehensive instructions and essential tips for optimal usage.

Share
Download
background image

5

Move the cursor as necessary to display the preview line at the desired offset position, and then
click to move the element or chain to that position or to place a copy there. Or, if you selected
the Graphical option, click to select the highlighted element, and then drag it to the desired
distance and click again. After you start the drag, a listening dimension displays, and you can
enter a specific offset distance.

Moving Elements with Cut-and-Paste

The Cut tool removes one or more selected elements from the drawing and pastes them to the clipboard.
You can then use the Paste from Clipboard or Paste Aligned tools to paste the elements in the current drawing
or in another project.

The Cut tool has the following restrictions:

■

You cannot cut elements that cannot be deleted, such as the last level in a building model.

■

You cannot cut some combinations of elements. For example, you cannot cut curtain panels and mullions
without cutting the entire curtain system.

■

You cannot cut an interior elevation arrow without cutting its adjoined elevation symbol.

■

You cannot cut some elements in any context. For example, you cannot cut the Ref. Level in the Family
Editor.

To cut and paste elements:

1

Select one or more elements in the drawing area.

2

Click Edit menu

 ➤ 

Cut, or click 

 on the Edit toolbar.

NOTE

You can also use the keyboard shortcut CTRL+X to cut elements.

3

Paste the elements using either of the following tools of the Edit menu:

■

Paste from Clipboard: To place the elements in another area of the drawing, or in another
project. See 

Pasting Elements from the Clipboard

 on page 321.

■

Paste Aligned: To place the elements to another level exactly above or below the original
location of the elements. See 

Pasting Aligned Elements

 on page 323.

Moving End-joined Components

You can move components that share a common end join simultaneously without breaking the join. To do
this, use a drag control or select an option on the shortcut menu. This functionality is available for walls,
lines, beams, braces, and line-based families.

The following image shows 3 walls moving together by their common end join.

304 | Chapter 7   Editing Elements

Summary of Contents for 24000-000000-9860 - Revit Architecture - PC















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 24000-000000-9860 - Revit Architecture - PC

Garmin ecoRoute Owner'S Manual Supplement preview
ecoRoute
Brand: Garmin Pages: 8
Campbell PC208 Instruction Manual preview
PC208
Brand: Campbell Pages: 133
Q-See Remote Client Software V 4.0.1 User Manual preview
Remote Client Software V 4.0.1
Brand: Q-See Pages: 72
MACROMEDIA COLDFUSION 5-ADVANCED ADMINISTRATION Manual preview
COLDFUSION 5-ADVANCED ADMINISTRATION
Brand: MACROMEDIA Pages: 372
Xerox 701P40211 System Manual preview
701P40211
Brand: Xerox Pages: 110
Cisco 2950C-24 - Catalyst Switch - Stackable Datasheet preview
2950C-24 - Catalyst Switch - Stackable
Brand: Cisco Pages: 18
Cisco CONFERENCING EXTENSIONS - ADMINISTRATOR GUIDE FOR MICROSOFT EXCHANGE Administrator'S Manual preview
CONFERENCING EXTENSIONS - ADMINISTRATOR GUIDE FOR MICROSOFT EXCHANGE
Brand: Cisco Pages: 61
Cisco Cisco mds 9124 - fabric switch Datasheet preview
Cisco mds 9124 - fabric switch
Brand: Cisco Pages: 9
Cisco CISCO1811 End User Instructions preview
CISCO1811
Brand: Cisco Pages: 16
Cisco Cisco MDS 9020 - Fabric Switch Configuration Manual preview
Cisco MDS 9020 - Fabric Switch
Brand: Cisco Pages: 22
Cisco Catalyst X6816 Datasheet preview
Catalyst X6816
Brand: Cisco Pages: 13
Cisco Cisco mds 9124 - fabric switch Specifications preview
Cisco mds 9124 - fabric switch
Brand: Cisco Pages: 3
Cisco DCNM Configuration preview
DCNM
Brand: Cisco Pages: 7
Cisco GEM318P User Manual preview
GEM318P
Brand: Cisco Pages: 74
Cisco Craft Works Interface Quick Start Manual preview
Craft Works Interface
Brand: Cisco Pages: 32
Cisco Catalyst Series Switch 2940 Hardware Installation Manual preview
Catalyst Series Switch 2940
Brand: Cisco Pages: 82
Cisco Catalyst Series Switch 2940 Regulatory Compliance And Safety Information Manual preview
Catalyst Series Switch 2940
Brand: Cisco Pages: 28
Cisco 11.0 BT Release Notes preview
11.0 BT
Brand: Cisco Pages: 58

Brands by name

Popular brands

Load more brands