manualshive.com logo in svg

Autodesk 24000-000000-9860 - Revit Architecture - PC, User Manual

The "Autodesk 24000-000000-9860 - Revit Architecture - PC" is a powerful design software for architects and designers. With its intuitive interface, this software enables users to create stunning building designs. Enhance your experience with the free and downloadable user manual available at manualshive.com, providing comprehensive instructions and essential tips for optimal usage.

Share
Download
background image

NOTE

You can have this dialog display again by clicking Settings menu

 ➤ 

Options. Click the Steering Wheels tab

and select Always Show the Pinned Wheel on Startup.

Display and Use Wheels

After a wheel is displayed, you can activate one of the available navigation tools by either clicking over one
of the wedges on the wheel or clicking and holding down the button on the pointing device. Once the
button is held down, dragging over the drawing area causes the current view to reorient. Releasing the button
returns you to the wheel.

Control the Appearance of Wheels

You can control the appearance of the wheels by changing the current mode, or by adjusting the size and
opacity. Wheels (except the 2D Navigation wheel) are available in two different modes: big and mini. To
change the current mode of a wheel, right-click the wheel and select a different mode.

In addition to changing the current mode, you can adjust the opacity and size for the wheels. The size of a
wheel controls how large or small the wedges and labels appear on the wheel; the opacity level controls the
visibility of the objects in the model behind the wheel. The settings used to control the appearance of the
wheels are in the SteeringWheels Options dialog box.

Control Tooltips for Wheels and Messages for Tools

Tooltips are displayed for each wedge and button on a wheel as the cursor hovers over them. The tooltips
appear below the wheel and identify what action will be performed if the wedge or button is clicked. You
can turn the display of tooltips on or off in the SteeringWheels Options dialog box.

Similar to tooltips, tool messages are displayed when you use one of the navigation tools from a wheel. Tool
messages are displayed over the drawing area and provide instructions for using the active navigation tool.
Like tooltips, you can turn tool messages on or off in the SteeringWheels Options dialog box. Disabling tool
messages only affects the messages that are displayed when using the Full Navigation wheel.

To close a wheel

Use one of the following methods to close a wheel:

■

Press the ESC.

■

Click the small x in the upper right-hand corner of the wheel.

■

Press 

F8

.

NOTE

For the following procedures, you can also access the Options dialog through Settings menu

 ➤ 

Options.

To change the size of the wheels

1

Display a wheel.

2

Right-click on the wheel and click Options.

3

In the Options dialog box, under Big Steering Wheel Appearance or Mini Wheel Appearance, select an
option for Size.

4

Click OK.

To change the opacity of the wheels

1

Display a wheel.

2

Right-click on the wheel and click Options.

SteeringWheels | 177

Summary of Contents for 24000-000000-9860 - Revit Architecture - PC















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 24000-000000-9860 - Revit Architecture - PC

Alcatel-Lucent Wireless Network Guardian 9900 Brochure preview
Wireless Network Guardian 9900
Brand: Alcatel-Lucent Pages: 2
Microtek ScanWizard Pro Reference Manual preview
ScanWizard Pro
Brand: Microtek Pages: 177
FARONICS DEVICE FILTER MAC Manual preview
DEVICE FILTER MAC
Brand: FARONICS Pages: 30
Asus Centralized Network Management User Manual preview
Centralized Network Management
Brand: Asus Pages: 41
Asus Application User Manual preview
Application
Brand: Asus Pages: 11
Asus W2V Hardware User Manual preview
W2V
Brand: Asus Pages: 72
Asus GigaX 1024P User's User Manual preview
GigaX 1024P User's
Brand: Asus Pages: 44
Asus V1J Hardware User Manual preview
V1J
Brand: Asus Pages: 83
Asus V1J Installation Manual preview
V1J
Brand: Asus Pages: 721
Asus ASWM Enterprise User Manual preview
ASWM Enterprise
Brand: Asus Pages: 106
Asus W1Ga User Manual preview
W1Ga
Brand: Asus Pages: 118
Asus Lamborghini VX2 (Japanese) User Manual preview
Lamborghini VX2
Brand: Asus Pages: 88
Asus Al Suite 3 Quick Manual preview
Al Suite 3
Brand: Asus Pages: 58
Asus V6V User Manual preview
V6V
Brand: Asus Pages: 90
Asus W2P Hardware User Manual preview
W2P
Brand: Asus Pages: 73
Asus U5F Hardware User Manual preview
U5F
Brand: Asus Pages: 71
Asus V2Je (Portuguese) Manual Do Utilizador preview
V2Je
Brand: Asus Pages: 96
Asus W3A User Manual preview
W3A
Brand: Asus Pages: 106

Brands by name

Popular brands

Load more brands