manualshive.com logo in svg

Autodesk 24000-000000-9860 - Revit Architecture - PC, User Manual

The "Autodesk 24000-000000-9860 - Revit Architecture - PC" is a powerful design software for architects and designers. With its intuitive interface, this software enables users to create stunning building designs. Enhance your experience with the free and downloadable user manual available at manualshive.com, providing comprehensive instructions and essential tips for optimal usage.

Share
Download
background image

Description

Name

Add or edit the wall sweep keynote. Click in the value box to open the Keynotes
dialog. See 

Keynotes

 on page 1058.

Keynote

The model type of the wall sweep.

Model

The manufacturer for the wall sweep’s materials

Manufacturer

Specific building or design comments.

Type Comments

Link to a web page (such as a manufacturer's web page).

URL

Description of the wall sweep.

Description

Description of the assembly based on the assembly code selection.

Assembly Description

Uniformat assembly code selected from a hierarchical list.

Assembly Code

A value to designate the particular wall sweep. This value must be unique for each
wall sweep in a project. Revit Architecture warns you if the number is already used

Type Mark

but allows you to continue using it. You can see the warning using the Review
Warnings command. See 

Reviewing Warning Messages

 on page 1334.

Cost of the materials for constructing the wall sweep. This information can be in-
cluded in a schedule.

Cost

Wall Sweep Instance Properties

Description

Name

Constraints

The distance from the wall face.

Offset From Wall

The level of the wall sweep. This property only appears for horizontal wall sweeps.

Level

The wall sweep’s offset from the level. This property only appears for horizontal wall
sweeps.

Offset From Level

Dimensions

The length of the wall sweep. This is a read-only parameter.

Length

Identity Data

Enter comments for the wall sweep.

Comments

598 | Chapter 11   Working with Architectural Components

Summary of Contents for 24000-000000-9860 - Revit Architecture - PC















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 24000-000000-9860 - Revit Architecture - PC

Samsung ML-1610 - B/W Laser Printer Manual preview
ML-1610 - B/W Laser Printer
Brand: Samsung Pages: 18
Samsung ML 3471ND - B/W Laser Printer Manual preview
ML 3471ND - B/W Laser Printer
Brand: Samsung Pages: 27
Samsung MFP SCX-6345N User Manual preview
MFP SCX-6345N
Brand: Samsung Pages: 49
AVIRA ANTIVIR VIRUS SCAN ADAPTER Configuration preview
ANTIVIR VIRUS SCAN ADAPTER
Brand: AVIRA Pages: 29
AMX WebLinx Instruction Manual preview
WebLinx
Brand: AMX Pages: 50
F-SECURE ANTI-VIRUS FOR MICROSOFT EXCHANGE 8.00 - Getting Started Manual preview
ANTI-VIRUS FOR MICROSOFT EXCHANGE 8.00 -
Brand: F-SECURE Pages: 29
Emerson Smart Wireless Navigator Reference Manual preview
Smart Wireless Navigator
Brand: Emerson Pages: 22
Emerson Site Manager User Manual preview
Site Manager
Brand: Emerson Pages: 130
Nokia PC Suite 6.7 User Manual preview
PC Suite 6.7
Brand: Nokia Pages: 29
Nokia NetMonitor Manual preview
NetMonitor
Brand: Nokia Pages: 29
Nokia N71 Service Manual preview
N71
Brand: Nokia Pages: 35
Nokia NPS6113000 - Secure Access System Getting Started Manual preview
NPS6113000 - Secure Access System
Brand: Nokia Pages: 48
Nokia N73 - Smartphone 42 MB Service Manual & Parts Manual preview
N73 - Smartphone 42 MB
Brand: Nokia Pages: 354
Nokia N73 - Smartphone 42 MB User Manual preview
N73 - Smartphone 42 MB
Brand: Nokia Pages: 265
Nokia Network Voyager Reference Manual preview
Network Voyager
Brand: Nokia Pages: 700
Symantec WISE MOBILE DEVICE PACKAGE EDITOR 7.0 SP2 Reference preview
WISE MOBILE DEVICE PACKAGE EDITOR 7.0 SP2
Brand: Symantec Pages: 22
Garmin Pilot for Android User Manual preview
Pilot for Android
Brand: Garmin Pages: 150
Red Hat CERTIFICATE SYSTEM 8 - AGENTS GUIDE Agents Manual preview
CERTIFICATE SYSTEM 8 - AGENTS GUIDE
Brand: Red Hat Pages: 146

Brands by name

Popular brands

Load more brands