manualshive.com logo in svg

Autodesk 24000-000000-9860 - Revit Architecture - PC, User Manual

The "Autodesk 24000-000000-9860 - Revit Architecture - PC" is a powerful design software for architects and designers. With its intuitive interface, this software enables users to create stunning building designs. Enhance your experience with the free and downloadable user manual available at manualshive.com, providing comprehensive instructions and essential tips for optimal usage.

Share
Download
background image

5

Specify sorting for the revision schedule, as follows:

a

Click the Sorting/Grouping tab of the Revision Properties dialog.

b

For Sort by, select Revision Sequence, and specify Ascending or Descending.

c

Ensure that Itemize every instance is selected.

6

Specify formatting for column headings in the revision schedule, as follows:

a

Click the Formatting tab of the Revision Properties dialog.

b

In the Fields list, select a field.

c

Specify the heading, orientation, and alignment for the field.

d

If you want to omit the selected field from the revision schedule, select Hidden Field.

Use the Hidden Field option, for example, if you want to use the field for sorting or grouping
but do not want it to display in the revision schedule.

Repeat these steps for each field in the revision schedule.

7

Specify display attributes for lines, text fonts, and schedule order and height, as follows:

a

Click the Appearance tab of the Revision Properties dialog.

b

For Build schedule, specify whether the revision schedule builds from the bottom up or
the top down.

See 

Building a Revision Schedule from the Top Down or Bottom Up

 on page 991.

c

For Height, specify whether the height of the revision schedule is user defined (fixed) or
variable.

See 

Defining the Height of the Revision Schedule

 on page 990.

d

Use the remaining options of the Appearance tab to define attributes for grid lines, header
text, and body text.

See 

Formatting a Schedule

 on page 136.

8

Click OK.

Revit Architecture creates the revision schedule and displays it in the drawing area.

9

In the Project Browser, double-click the empty node under Sheets (all).

The title block displays in the drawing area.

10

In the Project Browser, under Views (all)

 ➤ 

Schedules, select the revision schedule, and drag it

to the drawing area.

11

Place the revision schedule in the desired location on the title block.

To change the width of columns, select the revision schedule, and drag the blue triangles between
column headers.

12

(Optional) To rotate the revision schedule on the title block, see 

Rotating a Revision Schedule

on page 990.

13

To save the title block, click File menu

 ➤ 

Save, specify a location and file name (if needed), and

click Save.

14

Load the title block into a project.

See 

Loading a Title Block into a Project

 on page 987.

Revision Schedules on Title Blocks | 989

Summary of Contents for 24000-000000-9860 - Revit Architecture - PC















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 24000-000000-9860 - Revit Architecture - PC

Barracuda Networks NG Network Access Client SP4 Migration Instructions preview
NG Network Access Client SP4
Brand: Barracuda Networks Pages: 10
AMX I!-FTPSENDER Instruction Manual preview
I!-FTPSENDER
Brand: AMX Pages: 12
Omron WS02-NCTC1-E - 07-2001 Operation Manual preview
WS02-NCTC1-E - 07-2001
Brand: Omron Pages: 116
F-SECURE MOBILE SECURITY FOR SERIES 80 User Manual preview
MOBILE SECURITY FOR SERIES 80
Brand: F-SECURE Pages: 39
Quantum PX500 Series Installation Instructions Manual preview
PX500 Series
Brand: Quantum Pages: 26
Quantum Management Console 4.4 User Manual preview
Management Console 4.4
Brand: Quantum Pages: 120
ARRI Ramp Preview Controller Operation Manual preview
Ramp Preview Controller
Brand: ARRI Pages: 46
Meade Autostar II Instruction Manual preview
Autostar II
Brand: Meade Pages: 62
Denon DP-200USB Owner'S Manual preview
DP-200USB
Brand: Denon Pages: 29
Access ATOMIZER Operator'S Manual preview
ATOMIZER
Brand: Access Pages: 16
Intel SE72xx User Manual preview
SE72xx
Brand: Intel Pages: 30
Mad Catz SharkPort PS2 Owner'S Manual preview
SharkPort PS2
Brand: Mad Catz Pages: 16
Autodesk AutoCAD Design Suite 2013 Installation Manual preview
AutoCAD Design Suite 2013
Brand: Autodesk Pages: 138
Focusrite Plug-in Suite User Manual preview
Plug-in Suite
Brand: Focusrite Pages: 9
Oracle WebLogic JSR-170 Adapter Supported Configurations preview
WebLogic JSR-170 Adapter
Brand: Oracle Pages: 6
MACROMEDIA BREEZE-USING THE BREEZE PUBLISH WIZARD Use Manual preview
BREEZE-USING THE BREEZE PUBLISH WIZARD
Brand: MACROMEDIA Pages: 32
MACROMEDIA COLDFUSION 4.5-CFML LANGUAGE Reference preview
COLDFUSION 4.5-CFML LANGUAGE
Brand: MACROMEDIA Pages: 608
MACROMEDIA COLDFUSION STUDIO 5-USING COLDFUSION 5... Use Manual preview
COLDFUSION STUDIO 5-USING COLDFUSION 5...
Brand: MACROMEDIA Pages: 328

Brands by name

Popular brands

Load more brands