manualshive.com logo in svg

Autodesk 24000-000000-9860 - Revit Architecture - PC, User Manual

The "Autodesk 24000-000000-9860 - Revit Architecture - PC" is a powerful design software for architects and designers. With its intuitive interface, this software enables users to create stunning building designs. Enhance your experience with the free and downloadable user manual available at manualshive.com, providing comprehensive instructions and essential tips for optimal usage.

Share
Download
background image

Vertical Move

Select the slab edge, and drag it up or down. If the slab edge is multi-segmented, all segments move up or
down the same distance.

Slab edge moving vertically in section

Floor Slab Edge Properties

Parameter names, values, and descriptions for floor slab edges. Floor slab edges are classified under host
sweeps. Values are modifiable.

Floor Slab Edge Type Properties

Description

Name

The profile shape for the particular host sweep. Select from a list of predefined profiles,
or create your own profile using the profile-hosted.rft template. See 

Profile Families

on page 371.

Profile

Specifies the appearance of the host sweep in various views, including a raytraced
model. See 

Materials

 on page 459.

Material

Floor Slab Edge Instance Properties

Description

Name

The actual length of the host sweep.

Length

The actual volume of the floor slab edge.

Volume (floor slab edges only)

Moves the host sweep above or below the edge on which you created it.

Vertical profile offset

Moves the host sweep forward or backward from the edge on which you created
it.

Horizontal profile offset

Rotates the host sweep to the desired angle.

Angle

Floor Properties

You can modify several properties for floors, including the slope and the level. You can also modify properties
for an individual floor sketch line and the floor slope arrow.

646 | Chapter 11   Working with Architectural Components

Summary of Contents for 24000-000000-9860 - Revit Architecture - PC















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 24000-000000-9860 - Revit Architecture - PC

MACROMEDIA COLFUSION MX 7 - INSTALLING AND USING COLDFUSION... Using Manual preview
COLFUSION MX 7 - INSTALLING AND USING COLDFUSION...
Brand: MACROMEDIA Pages: 72
Lexmark Apps User Manual preview
Apps
Brand: Lexmark Pages: 3
Teklynx Form Designer User Manual preview
Form Designer
Brand: Teklynx Pages: 30
ScanSoft OMNIPAGE 15 Manual preview
OMNIPAGE 15
Brand: ScanSoft Pages: 94
Microtek ScanWizard Pro Reference Manual preview
ScanWizard Pro
Brand: Microtek Pages: 177
Panasonic LightPen3 Operating Instructions Manual preview
LightPen3
Brand: Panasonic Pages: 27
Panasonic LUMIX Simple Viewer Operating Instructions Manual preview
LUMIX Simple Viewer
Brand: Panasonic Pages: 32
Red Hat CLUSTER SUITE FOR ENTERPRISE LINUX 4.7 Overview preview
CLUSTER SUITE FOR ENTERPRISE LINUX 4.7
Brand: Red Hat Pages: 78
M-Audio Pro Tools M-Powered 7 Quick Start Manual preview
Pro Tools M-Powered 7
Brand: M-Audio Pages: 74
Gallo Studio Devil User Manual preview
Studio Devil
Brand: Gallo Pages: 9
GRASS VALLEY K2-AVID TRANSFER MANAGER Datasheet preview
K2-AVID TRANSFER MANAGER
Brand: GRASS VALLEY Pages: 2
GRASS VALLEY JUPITER VSD Datasheet preview
JUPITER VSD
Brand: GRASS VALLEY Pages: 2
Nikon 25338 User Manual preview
25338
Brand: Nikon Pages: 240
Genius KIDSBALL Manual preview
KIDSBALL
Brand: Genius Pages: 7
Genius F509 User Manual preview
F509
Brand: Genius Pages: 11
MACROMEDIA FLASH MX 2004-LEARNING FLASH Manual preview
FLASH MX 2004-LEARNING FLASH
Brand: MACROMEDIA Pages: 122
KAPERSKY ANTI-VIRUS 5.5 - FOR MICROSOFT EXCHANGE SERVER... Administrator'S Manual preview
ANTI-VIRUS 5.5 - FOR MICROSOFT EXCHANGE SERVER...
Brand: KAPERSKY Pages: 143
TANDBERG MOVI 4.0 - FOR MAC User Manual preview
MOVI 4.0 - FOR MAC
Brand: TANDBERG Pages: 19

Brands by name

Popular brands

Load more brands