Honda 2004 Odyssey, Service Manual

Page: 2284 / 2459

−
−
−
−
０１
０１
Ｓ０Ｘ４ＡＺＢＫ７９１０００Ｒ１２９ＸＦＡＡＴ００
’03-04 Models
DTC 12-9x (12-90 to 12-99, 12-9A to 12-9F):
DTC 12-Bx (12-B0 to 12-B9, 12-BA to 12-BF):
Special Tools Required
YES
NO
YES
NO
23-219
A
07XAZ-SZ30100
07SAZ-TB4011A
A
Short to Ground in Front Passenger’s First
Inflator
Short to Ground in Front Passenger’s Second
Inflator
• SRS inflator simulator 07SAZ-TB4011A
• SRS simulator lead F 07XAZ-SZ30100
1. Erase the DTC memory (see page 23-39).
2. Turn the ignition switch ON (II), and check that the
SRS indicator comes on for about 6 seconds and
then goes off.
Go to step 3.
Intermittent failure, system is OK at this time.
Go to Troubleshooting Intermittent Failures (see
page 23-39).
3. Turn the ignition switch OFF. Disconnect the
battery negative cable, and wait for 3 minutes.
4. Disconnect the front passenger’s airbag 4P
connector from the SRS main harness (A).
5. Connect the special tool (2 connectors) to the
SRS main harness 4P connector.
6. Reconnect the battery negative cable.
7. Erase the DTC memory.
8. Read the DTC (see page 23-38).
Go to step 9.
Short to ground in the front passenger’s
airbag first or second inflator; replace the front
passenger’s airbag (see page 23-370).
9. Turn the ignition switch OFF. Disconnect the
battery negative cable, and wait for 3 minutes.
10. Disconnect SRS unit connector A (28P) from the
SRS unit.
11. Disconnect the SRS inflator simulator from SRS
simulator lead F.
(cont’d)
Does the SRS indicator stay on?
Is DT C 12-9x or 12-Bx indicated?
03/07/29 10:37:55 61S0X050_230_0219