Honda 2004 Odyssey, Service Manual

Page: 956 / 2459

−
−
−
−
０１
＊０１
Ｓ０Ｘ４ＡＡ１Ｋ７７１０００９１７０５ＦＡＡＴ００
DTC P1705:
YES
NO
YES
NO
14-343
LG2 (BRN/YEL) ATP R (WHT)
LG1 (BRN/YEL)
PCM CONNECTORS
B (25P) D (16P)
LG2 (BRN/YEL)
LG1 (BRN/YEL)
ATP NP (BLU/WHT)
PCM CONNECTOR B (25P)
Short in Transmission Range
Switch Circuit
NOTE:
• Record all freeze data and review General
Troubleshooting Information (see page 14-247)
before you troubleshoot.
• This code is caused by an electrical circuit problem
and cannot be caused by a mechanical problem in the
transmission.
1. Turn the ignition switch ON (II).
2. Shift to all positions other than R.
3. Measure the voltage between PCM connector
terminals D6 and B20 or B22 .
Go to step 4.
Check for a short in the wire between PCM
connector terminal D6 and the transmission range
switch or A/T gear position indicator, and check for
an open in the wires between PCM connector
terminals B20 and B22 and body ground (G101). If
the wires are OK, check for loose terminal fit in the
PCM connectors. If necessary, substitute a known-
good PCM and recheck.
4. Shift to all positions other than P or N.
5. Measure the voltage between PCM connector
terminals B14 and B20 or B22 .
Go to step 6.
Check for a short in the wire between PCM
connector terminal B14 terminal and the
transmission range switch. If the wires are OK,
check for loose terminal fit in the PCM connectors.
If necessary, substitute a known-good PCM and
recheck.
(cont’d)
Wire side of female terminals
Wire side of female terminals
Is ther e batter y voltage?
Is ther e about 5 V ?
03/07/29 09:39:12 61S0X050_140_0346