Honda 2004 Odyssey, Service Manual

Page: 1328 / 2459

−
−
−
−
−
−
Ｓ０Ｘ４Ａ０６Ｋ７０２０００８１８１０ＦＡＡＴ００
０３
Ｓ０Ｘ４Ａ０６Ｋ７０２０００８１２４０ＦＡＡＴ１０
ABS DTC 81: TCS DTC 24, 25, 26, 27:
YES
NO
YES
NO
TCS DTC Appropriate Terminal
YES
NO
19-127 19-127
NCL (YEL/GRN) NOL (RED/GRN)
NCR
(GRY)
NOR (LT BLU)
ABS/TCS CONTROL UNIT CONNECTOR A (26P)
Central Processing Unit (CPU)
Diagnosis, and ROM/RAM Diagnosis
TCS Solenoid
1. Clear the DTC (see step 1 on page 19-83).
2. Test-drive the vehicle.
Replace the ABS/TCS control unit.
Intermittent failure; the vehicle is OK at this
time.
1. Verify the TCS DTC.
Do the appropriate troubleshooting for
DTC 28.
Go to step 2.
2. Turn the ignition switch OFF.
3. Disconnect the modulator unit connector and the
ABS/TCS control unit connector A (26P).
4. Check for continuity between the appropriate ABS/
TCS control unit connector A (26P) TCS solenoid
circuit terminal and body ground (see table).
24: NOR No. 16
25: NCR No. 15
26: NOL No. 3
27: NCL No. 2
Repair short to body ground in the
appropriate solenoid circuit wire between the
ABS/TCS control unit and the modulator unit.
Go to step 5.
(cont’d)
Wire side of female terminals
Does the ABS indicator come on and is DT C 81
indicated?
Is T CS DT C 28 indicated?
Is ther e continuity?
03/07/29 09:57:43 61S0X050_190_0127