Honda 2004 Odyssey, Service Manual

Page: 450 / 2459

−
−
−
−
＊０２
０１
＊０３
YES
NO
YES
NO
11-141
IGNITION COIL 3P CONNECTOR
GND
(BLK)
PCM CONNECTOR B (24P)
IGPLS1 (YEL/GRN)
IGPLS2 (RED)
IGPLS4 (YEL)
IGPLS6
(WHT/
BLU)
IGPLS3 (BLU)
IGPLS5
(BLK/
RED)
IGNITION COIL 3P CONNECTOR
JUMPER WIRE
24. Turn the ignition switch OFF.
25. Check for continuity between ignition coil 3P
connector terminal No. 2 and body ground.
Go to step 26.
Repair open in the wire between the ignition
coil and G101 (or G102).
26. Disconnect PCM connector B (24P).
27. Check for continuity between body ground and the
PCM connector terminal (see table).
PROBLEM
CYLINDER
DTC PCM
TERMINAL
WIRE
COLOR
No. 1 P0301 B10 YEL/GRN
No. 2 P0302 B9 RED
No. 3 P0303 B8 BLU
No. 4 P0304 B19 YEL
No. 5 P0305 B18 BLK/RED
No. 6 P0306 B17 WHT/BLU
Repair short in the wire between the PCM
and the ignition coil.
Go to step 28.
28. Connect ignition coil 3P connector terminal No. 1 to
body ground with a jumper wire (see table).
PROBLEM
CYLINDER
DTC WIRE
COLOR
No. 1 P0301 YEL/GRN
No. 2 P0302 RED
No. 3 P0303 BLU
No. 4 P0304 YEL
No. 5 P0305 BLK/RED
No. 6 P0306 WHT/BLU
(cont’d)
Wire side of
female terminals
Wire side of female terminals
Wire side of female terminals
Is ther e continuity?
Is ther e continuity?
03/07/29 09:21:29 61S0X050_110_0141