Honda 2004 Odyssey, Service Manual

Page: 243 / 2459

＊０８
＊０９
＊０１
Ｓ０Ｘ４Ａ００Ａ１８３１６６０００００ＭＡＡＴ０１
Out-of-Round and Taper
Journal Out-of-Round
Standard (New): 0.005 mm (0.0002 in.) max.
Service Limit:
0.010 mm (0.0004 in.)
Journal Taper
Standard (New): 0.005 mm (0.0002 in.) max.
Service Limit:
0.010 mm (0.0004 in.)
7-14 7-14
Engine Block
Crankshaft and Piston Removal
(cont’d) Crankshaft Inspection
A
C
B
B
A
15. Remove the bearing cap bolts (A) and bearing cap
side bolts (B), then remove the bearing cap (C).
16. Lift the crankshaft (A) out of the cylinder block,
being careful not to damage the journals.
17. Reinstall the main caps and bearings on the
cylinder block in the proper order.
1. Remove the crankshaft from the cylinder block (see
page 7-12).
2. Clean the crankshaft oil passages with pipe
cleaners or a suitable brush.
3. Check the keyway and threads.
4. Measure out-of-round at the middle of each rod
and main journal in two places. The difference
between measurements on each journal must not
be more than the service limit.
5. Measure taper at the edges of each rod and main
journal. The difference between measurements on
each journal must not be more than the service
limit.
03/07/29 09:13:01 61S0X050_070_0014