Honda 2004 Odyssey, Service Manual

Page: 1234 / 2459

０７
０８
０９
１０
19-33
Greasing symbols:
Brake shoe ends and connecting rod ends
Opposite edge of the shoe
Sliding surface
C
A A
A
A
A A
C
C
C
C
C
B
A
C
B
D
E
D
B
C A
A
B
4. Apply Molykote 44 MA grease to the shoe ends and
connecting rod ends (A), sliding surfaces (B), and
opposite edges of the parking brake shoe (C) as
shown. Wipe off any excess grease Keep grease off
the brake linings.
5. Install the tension pin (A), retainer spring (B), and
retainer (C) of the rearward brake shoe (D). Make
sure the tension pin does not contact the parking
brake lever.
6. Clean the threaded portions of the clevis A, and
coat the threads with multipurpose grease. Clean
the sliding surface of the clevis B, and coat the
sliding surface with multipurpose grease. Install
the clevis A and B on the adjuster (C), and shorten
the clevis A by turning the adjuster.
7. Reinstall the brake shoe adjuster assembly (D), and
hook the lower return spring (E) on the parking
brake shoes.
8. Install the rod spring (A) to the connecting rod (B)
first. Then install the connecting rod on the parking
brake shoes.
(cont’d)
03/07/29 09:54:09 61S0X050_190_0033