Honda 2004 Odyssey, Service Manual

Page: 1150 / 2459

０４
０５
０６
０１
０７
17-31
C
A
B
A A
B
A
D
C
07XAA-001030A
C
B
A
07ZAA-S0XA100
A
11. Remove the following parts.
• Three way catalytic converter (TWC) (B) (see
• Splash shield (C)
12. Remove the feed line mounting brackets (A) from
front subframe.
13. Loosen the 14 mm flare nut (A), and disconnect the
feed line (B).
14. Loosen the adjustable hose clamp (C) and
disconnect the return hose (D).
15. Lift and support the engine with the special tools.
Position the tool over the hood latch. Loop the
cable (A) around the throttle body (B), and tighten
the wing nut (C) on the tool by hand until the cable
is tight.
NOTE: For ’02-04 models, replace the cable eyebolt
assembly (A) on the engine support fixture with
07ZAA-S0XA100.
16. Remove the rear engine mount (A).
(cont’d)
03/07/29 09:49:30 61S0X050_170_0031
• Exhaust pipe (A) (see page 9-11)
page 9-11)