Honda 2004 Odyssey, Service Manual

Page: 1069 / 2459

＊０２
3rd Clutch
14-456
Shafts and Clutches
Clutch Inspection (cont’d)
BALL BEARING
CLUTCH DRUM
O-RINGS
CLUTCH PISTON
DISC SPRING
CHECK VALVE
RETURN SPRING
SPRING RETAINER
SNAP RING
CLUTCH PLATES,
Five Plates
Standard thickness:
2.3 mm (0.091 in.)
CLUTCH DISCS,
Five Discs
Standard thickness:
1.94 mm (0.076 in.)
CLUTCH END PLATE
SNAP RING
1. Inspect the clutch piston and clutch piston check valve. If the clutch check valve is loose or stuck damaged, replace
the clutch piston.
2. Check the spring retainer for wear and damage.
3. Inspect the clutch discs, clutch plates, and clutch end plate for wear, damage, and discoloration.
• If the clutch discs are worn or damaged, replace the discs as a set.
• If the clutch plates are worn, damaged, or discolored, replace the plates as a set.
• If the clutch end plate is worn, damaged, or discolored, inspect the clutch end-plate-to-top-disc clearance, then
replace the clutch-end-plate.
4. If the 3rd clutch assembly, clutch discs, or clutch plates are replaced, replace the PCM (see page 11-4).
Replace.
03/07/29 09:46:08 61S0X050_140_0459