Honda 2004 Odyssey, Service Manual

Page: 1436 / 2459

０１
０１
Ｓ０Ｘ４Ａ００Ｊ２６２２０２３０１０１ＫＤＡＴ００
20-71
Glove Box Removal/Installation
B
A
Fastener Locations
: Bolt, 2
5 x 0.8 mm
9 N·m
(0.9 kgf·m,
7 lbf·ft)
A
SRS components are located in this area. Review the
SRS component locations, ’99-01 models (see page 23-
18), ’02 model (see page 23-19), ’03-04 models (see
page 23-20), and the precautions and procedures (see
page 23-21) before performing repairs or service.
NOTE:
• Take care not to scratch the dashboard and related
parts.
• If the glove box swings down without any support,
the hinges can be overextended and damaged. To
prevent damage to the glove box hinge, use a piece
of foam or a bundle of shop towels to support it.
1. While holding the glove box (A), remove the glove
box stop (B) on each side.
2. Remove the bolts, then remove the glove box (A).
3. Install the glove box in the reverse order of
removal.
03/07/29 10:01:52 61S0X050_200_0073