Honda 2004 Odyssey, Service Manual

Page: 1181 / 2459

１０
１１
１２
０２
＊０６
18-14
Front Suspension
Knuckle/Hub Replacement (cont’d)
A
C
B
07746-0010500
B
A
07749-0010000
B
A
07GAF-SE00100
C
BLACK COLOR
METAL COLOR
INSIDE
B
07965-SD90100
D
A
07948-SB00101
C
D
9.8 N·m (1.0 kgf·m, 7.2 lbf·ft)
C
B
A
18. Remove the snap ring (A) and the splash guard (B)
from the knuckle (C).
19. Press the wheel bearing (A) out of the knuckle (B)
using the special tools and a press.
20. Press the wheel bearing inner race (A) from the hub
(B) using the special tool, a commercially available
bearing separator (C), and a press.
21. Wash the knuckle and hub thoroughly in high flash
point solvent before reassembly.
22. Press a new wheel bearing (A) into the knuckle (B)
using the old bearing (C), a steel plate (D), the
special tool, and a press. Place the wheel bearing
on the knuckle with the pack seal side facing (metal
color) toward the inside. Be careful not to damage
the sleeve of the pack seal.
23. Install the snap ring (A) securely in the knuckle (B).
24. Install the splash guard (C), and tighten the screws
(D).
Press
Press
Press
03/07/29 09:51:10 61S0X050_180_0014