Honda 2004 Odyssey, Service Manual

Page: 1269 / 2459

−
−
−
−
−
−
−
−
−
−
＊０１
＊０２
０２
０３
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
19-68
ABS Components
DTC Troubleshooting (cont’d)
PUMP MOTOR CONNECTOR
MOTOR (WHT/BLU)
MOTOR (WHT/BLU)
MOTOR GND (BLK)
PUMP MOTOR CONNECTOR
ABS CONTROL UNIT CONNECTOR B (12P)
PMR (YEL/RED)
ABS CONTROL UNIT CONNECTOR B (12P)
PMR (YEL/RED)
7. Measure the voltage between terminal No. 1 and
body ground.
Go to step 8.
Repair open in the wire between the under-
hood ABS relay box and the pump motor.
8. Measure the voltage between the pump motor
connector terminal No. 1 and No. 2.
Go to step 9.
Repair open in the wire between the pump
motor and body ground (G302).
9. Remove the pump motor relay, then connect relay
terminals No. 4 and No. 5 together with a jumper
wire.
Go to step 10.
Replace the pump motor.
10. Disconnect the ABS control unit connector B (12P).
11. Check for continuity between terminal No. 12 and
body ground.
Repair short to body ground in the wire
between the under-hood ABS relay box and the
ABS control unit.
If the problem recurs, replace the ABS control
unit.
12. Disconnect the ABS control unit connector B (12P).
13. Check for continuity between terminal No. 12 and
body ground.
Repair short to body ground in the wire
between the under-hood ABS relay box and the
ABS control unit.
Replace the pump motor relay (Pump motor
relay stuck ON).
Terminal side of female terminals
Terminal side of female terminals
Wire side of female terminals
Wire side of female terminals
Is ther e about 10 V ?
Is ther e about 10 V ?
Does the pump motor r un?
Is ther e continuity?
Is ther e continuity?
03/07/29 09:55:52 61S0X050_190_0068