Honda 2004 Odyssey, Service Manual

Page: 2226 / 2459

−
−
−
−
０８
０９
＊０１
１１
YES
NO
YES
NO
23-161
07YAZ-S3AA100
07SAZ-TB4011A
A
SRS UNIT CONNECTOR A (18P)
C851
A
SRS MAIN HARNESS 28P CONNECTOR
14. Turn the ignition switch OFF.
15. Connect the special tool (jumper connector) to the
right engine compartment wire harness 2P
connector (A).
16. Check resistance between the No. 1 and No. 12
terminals of SRS unit connector A (18P). There
should be 1
or less.
Faulty right front impact sensor or SRS unit.
Replace the sensor; if the problem is still present,
replace the SRS unit (see page 23-382).
Go to step 23.
17. Disconnect the SRS main harness 28P connector
(A) from the SRS floor harness 28P connector C851.
18. Check resistance between the No. 13 and No. 28
terminals of the SRS main harness 28P connector.
There should be an open circuit, or at least 1 M
.
Short in the SRS floor harness; replace the
SRS floor harness.
Short in the right engine compartment wire
harness or SRS main harness; replace the faulty
harness.
(cont’d)
Wire side of female terminals
Wire side of female terminals
Is the r esistance as specif ied?
Is the r esistance as specif ied?
03/07/29 10:36:10 61S0X050_230_0161