Honda 2004 Odyssey, Service Manual

Page: 456 / 2459

−
−
−
−
−
−
−
−
−
−
−
−
０１
０２
０３
Ｓ０Ｘ４ＡＺ６Ｋ７７１０００９０３３５ＦＡＡＴ００
＋ −
＋ −
＋
−
DTC P0335 ’99-00, ’02-04 Models:
DTC P0336 ’99-00, ’02-04 Models:
YES
NO
YES
NO
YES
NO
YES
NO
11-147
CKP SENSOR 2P CONNECTOR
CKP CKP
CKP SENSOR 2P CONNECTOR
CKP CKP
PCM CONNECTOR C (31P)
CKP
(BLU)
CKP
(WHT)
CKP
Sensor Circuit No Signal
CKP
Sensor Circuit Intermittent Interruption
1. Reset the PCM (see page 11-4).
2. Start the engine.
Go to step 3.
Intermittent failure, system is OK at this time.
Check for poor connections or loose terminals at
the CKP sensor and the PCM.
3. Turn the ignition switch OFF.
4. Disconnect the CKP sensor 2P connector.
5. Measure resistance between CKP sensor 2P
connector terminals No. 1 and No. 2.
Go to step 6.
Replace the CKP sensor (see page 6-61).
6. Check for continuity between body ground and CKP
sensor 2P connector terminals No. 1 and No. 2
individually.
Replace the CKP sensor (see page 6-61).
Go to step 7.
7. Reconnect the CKP sensor 2P connector.
8. Disconnect PCM connector C (31P).
9. Measure resistance between PCM connector
terminals C8 and C9.
Go to step 10.
Repair open in the wire between the PCM
(C8, C9) and the CKP sensor.
(cont’d)
Terminal side of male terminals
Terminal side of male terminals
Wire side of female terminals
Is DT C P0335 and/ or P0336 indicated?
Is ther e 1,850 2,450 ?
Is ther e continuity?
Is ther e 1,850 2,450 ?
03/07/29 09:21:33 61S0X050_110_0147