Honda 2004 Odyssey, Service Manual

Page: 1450 / 2459

＊１５
＊１６
＊０３
Manual seat (’03-04 models passenger’s seat with
side airbag) - With under seat storage tray (with
seat cushion heater for some models)
20-85
To body
A
B
A
To body
Fastener Locations
: Bolt, 4
10 x 1.25 mm
47 N·m (4.8 kgf·m,
35 lbf·ft)
13. For some ’00-04 models: Disconnect the navigation
unit connectors (A) and GPS antenna connector (B)
from under the passenger’s seat.
14. Remove the headrest.
15. With the help of an assistant, carefully remove the
front seat through the front door opening.
16. Install the seat in the reverse order of removal, and
note these items:
• Replace any damaged clips.
• Make sure each connector is plugged in properly.
• Apply liquid thread lock to the seat mounting
bolts before reinstallation.
• Tighten the seat mounting bolts to the specified
torque in the sequence shown. Slide the seat all
the way back and tighten
and , then slide it
forward and tighten and .
• Push the cover clips into place securely.
• For ’02-04 models with side airbag: Reconnect
the negative cable to the battery.
• For ’02-04 models with side airbag: Enter the
anti-theft code for the radio and navigation
system, then enter the customer’s radio station
presets.
• For ’02-04 models with side airbag: Do the PCM
idle learn procedure (see page 11-202).
• For ’02-04 models with side airbag: Do the power
window control unit reset procedure (see page
22-200).
03/07/29 10:02:08 61S0X050_200_0087