Honda 2004 Odyssey, Service Manual

Page: 2245 / 2459

−
−
−
−
−
−
０３
０１
＊０１
０２
YES
NO
YES
NO
23-180
SRS
DTC Troubleshooting (cont’d)
B
SRS UNIT CONNECTOR B (18P)
C852
A
SRS FLOOR SUBHARNESS 28P CONNECTOR
8. Disconnect SRS unit connector B (18P) from the
SRS unit.
9. Check resistance between the No. 8 and No. 15
terminals of SRS unit connector B (18P). There
should be 0
1.0 .
Faulty driver’s side impact sensor or SRS
unit; replace the driver’s side impact sensor (see
page 23-385). If the problem is still present, replace
the SRS unit (see page 23-382).
Go to step 10.
10. Disconnect the SRS floor subharness 28P
connector (A) from the SRS floor harness 28P
connector C852.
11. Check resistance between the No. 18 and No. 17
terminals of the SRS floor subharness 28P
connector. There should be 0
1.0 .
Open in the SRS floor harness; replace the
SRS floor harness.
Open in the SRS floor subharness or left side
wire harness; replace the faulty harness.
Wire side of female terminals
Wire side of female terminals
Is the r esistance as specif ied?
Is the r esistance as specif ied?
03/07/29 10:36:24 61S0X050_230_0180